VoiceMax... [Archive]

Telstar Electronics

February 12th 07, 02:38 PM

Trials with the newly designed VoiceMax speech processor module are
going well. I have the first "hay-wired" prototype in mobile operation
for about one week now. The reports are all positive. So far, nobody
believes I'm working a little crappy Cobra19 DX4 with a stock mic...
except for the trucker that pulled up along side me and saw the stock
mic for himself. With the proto locked-in at the maximum 15:1
compression right now... the reports I'm getting say that it's the
loudest and clearest stock mic they have ever heard. Whether you're
whispering or screaming... the volume level is exactly the same. Also,
the noise gate feature works fantastic. It's always been a mobile
operator's dream to have high audio gain without background noise...
now that's possible. I plan to start laying out the first all surface
mount PCB to allow the next prototype unit to be mounted inside the
radio.

www.telstar-electronics.com

Telstar Electronics

February 15th 07, 07:53 PM

The VoiceMax prototype field testing continues. There are no issues at
this time.
Several people have emailed me asking questions. Here are some of
those answers:
Currently installed in a Cobra19 DX4 with stock mic.
The VoiceMax module has been set on the prototype at a fixed 15:1
compression ratio.
The Cobra19's limiter pot has been adjusted so that the radio will
maintain a 95% modulation envelope from a whisper... to yelling into
the mic. (statement based on 2" distance from mic)
The "noise gate" has been adjusted to block all sounds below an input
level of 1mV from mic. At this level... and with the stock Cobra
mic... it blocks all tire noise in my vehicle.
Output of module has been adjusted to match the output of the stock
mic. (about 40mV @ 1KHz tone)
The power source for the module is derived from inside the radio and
is fully regulated. The current draw is around 15mA.
Attack time of the modules limiter is about 1mS. Decay time has been
designed to around 500mS.

I plan on starting an FAQ page out at the Telstar Electronics web site
based on these... and other questions I receive.

Please go to http://www.telstar-electronics.com/default_files/VoiceMax.htm
to see the latest details as they become available.

Telstar Electronics

February 19th 07, 07:44 PM

The second prototype unit has been put into mobile operation. We have
also set up an FAQ regarding this new product at
http://www.telstar-electronics.com/default_files/NewProductDevelopment.htm

Telstar Electronics

February 25th 07, 04:56 PM

I'm attempting to finalize the feature list for the new VoiceMax
module. I'm torn between having an adjustment for the compression
ratio or having a fixed value. What are your feelings? Is an
adjustment pot for compression a "must"? Thanks for your input.

http://www.telstar-electronics.com/default_files/NewProductDevelopment.htm

U-Know-Who

February 25th 07, 10:27 PM

"Telstar Electronics" > wrote in message
ups.com...
> I'm attempting to finalize the feature list for the new VoiceMax
> module. I'm torn between having an adjustment for the compression
> ratio or having a fixed value. What are your feelings? Is an
> adjustment pot for compression a "must"? Thanks for your input.
>
> http://www.telstar-electronics.com/default_files/NewProductDevelopment.htm
>
>

Hahahahahahahahaha!!!! $500 for your splatterbox? "LOL"

http://www.telstar-electronics.com/default_files/SkyWave2879ABTC.htm

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

Telstar Electronics

February 25th 07, 11:57 PM

I'm not sure what your comment has to do with my question...

http://www.telstar-electronics.com/default_files/NewProductDevelopment.htm

U-Know-Who

February 26th 07, 12:45 AM

"Telstar Electronics" > wrote in message
oups.com...
> I'm not sure what your comment has to do with my question...
>
> http://www.telstar-electronics.com/default_files/NewProductDevelopment.htm
>
>

I'm not surprised...

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

Telstar Electronics

February 26th 07, 01:05 AM

> I'm not surprised...

Thanks for your comment...

http://www.telstar-electronics.com/default_files/NewProductDevelopment.htm

james

February 26th 07, 02:48 AM

On 25 Feb 2007 07:56:23 -0800, "Telstar Electronics"
> wrote:

>+++I'm attempting to finalize the feature list for the new VoiceMax
>+++module. I'm torn between having an adjustment for the compression
>+++ratio or having a fixed value. What are your feelings? Is an
>+++adjustment pot for compression a "must"? Thanks for your input.
>+++
>+++http://www.telstar-electronics.com/default_files/NewProductDevelopment.htm
****************

Hey you need the conpression man so that the CBers can crank it up and
one can hear an ant fart across the room.

james

Telstar Electronics

February 26th 07, 11:46 AM

Telstar Electronics

February 27th 07, 01:44 PM

Thanks for your email replies. I don't blame you for not wanting to
post in this forum. The VoiceMax design is in it's final stages, and
the first PC board has started layout. Please visit
http://www.telstar-electronics.com/default_files/NewProductDevelopment.htm
for the latest details and scheduled release date for the new VoiceMax
speech processor module. Thanks again for your help in developing this
new product!

www.telstar-electronics.com

Frank Gilliland

February 27th 07, 02:22 PM

On 27 Feb 2007 04:44:33 -0800, "Telspam Electronics"
> wrote in
. com>:

>Thanks for your email replies. I don't blame you for not wanting to
>post in this forum......

Nobody's falling for your charade, Brian. Climb out of your parents'
basement and get a job already.

Telstar Electronics

February 27th 07, 10:14 PM

Background:
Two-way radio communication relies on the modulation content contained
within the signal. Maintaining a high modulation level is crucial in
providing the highest possible efficiency from any transmitter
operating on AM, FM, and SSB. Current two-way radios normally rely on
microphones that inherently change audio levels delivered to the
transmitter. This causes transmitter modulation to fluctuate greatly
depending on voice level and pitch. This audio fluctuation lowers the
average modulation* levels applied to the transmitter, resulting in
less than optimal transmission range.
*Average modulation levels for voice type transmissions are
approximately 35-45%

General Product Description:
An electronic module that can be fitted to two-way radios that
provides dynamic speech compression and limiting on transmit. The
speech compression will provide a constant level (95-100%) of
modulation to transmitted signals. The module will also incorporate a
"noise gate" that will effectively eliminate background noise below a
desired level.

http://www.telstar-electronics.com/default_files/NewProductDevelopment.htm

Frank Gilliland

February 28th 07, 05:30 PM

On 27 Feb 2007 13:14:13 -0800, "Telspam Electronics"
> wrote in
om>:

>Background:
>Two-way radio communication relies on the modulation content contained
>within the signal. Maintaining a high modulation level is crucial in
>providing the highest possible efficiency from any transmitter
>operating on AM, FM, and SSB. Current two-way radios normally rely on
>microphones that inherently change audio levels delivered to the
>transmitter. This causes transmitter modulation to fluctuate greatly
>depending on voice level and pitch. This audio fluctuation lowers the
>average modulation* levels applied to the transmitter, resulting in
>less than optimal transmission range.
>*Average modulation levels for voice type transmissions are
>approximately 35-45%
>
>General Product Description:
>An electronic module that can be fitted to two-way radios that
>provides dynamic speech compression and limiting on transmit. The
>speech compression will provide a constant level (95-100%) of
>modulation to transmitted signals. The module will also incorporate a
>"noise gate" that will effectively eliminate background noise below a
>desired level.
>

"LOL!"

Steveo

February 28th 07, 06:20 PM

Frank Gilliland > wrote:
>> "LOL!"
>
Telspam Electronics <-------

Telstar Electronics

February 28th 07, 07:55 PM

The VoiceMax project is progressing on schedule and a product release
date has been set. This date has been set on the conservative side and
the product could conceivably be released sooner. I invite all of you
to keep abreast of the continuing progress with this product at
http://www.telstar-electronics.com/default_files/NewProductDevelopment.htm

tnom@mucks.net

February 28th 07, 09:31 PM

>Telspam Electronics <-------

Telstar Rejectronics

Steveo

February 28th 07, 10:55 PM

wrote:
> >Telspam Electronics <-------
>
> Telstar Rejectronics
>
Telar Erectronics

james

March 1st 07, 02:26 PM

On 28 Feb 2007 10:55:31 -0800, "Telstar Electronics"
> wrote:

>+++The VoiceMax project is progressing on schedule and a product release
>+++date has been set. This date has been set on the conservative side and
>+++the product could conceivably be released sooner. I invite all of you
>+++to keep abreast of the continuing progress with this product at
>+++http://www.telstar-electronics.com/default_files/NewProductDevelopment.htm
*************

I am waiting with such great anticipation that I can't hardly control
myself.

I hope it is soon so that the suspense will be over.

james

Telstar Electronics

March 1st 07, 10:39 PM

On Mar 1, 7:26 am, james > wrote:
> I am waiting with such great anticipation that I can't hardly control
> myself.

I'm sorry to hear that your incontinence problem still plagues you
from time to time...

www.telstar-electronics.com

james

March 2nd 07, 03:45 AM

On 1 Mar 2007 13:39:35 -0800, "Telstar Electronics"
> wrote:

>+++On Mar 1, 7:26 am, james > wrote:
>+++> I am waiting with such great anticipation that I can't hardly control
>+++> myself.
>+++
>+++I'm sorry to hear that your incontinence problem still plagues you
>+++from time to time...
>+++
>+++www.telstar-electronics.com
******

Not incontinence but laughter.

james

Telstar Electronics

March 6th 07, 07:17 PM

On Mar 1, 3:39 pm, "Telstar Electronics" >
wrote:
> On Mar 1, 7:26 am, james > wrote:
>
> > I am waiting with such great anticipation that I can't hardly control
> > myself.
>
> I'm sorry to hear that your incontinence problem still plagues you
> from time to time...
>
> www.telstar-electronics.com

Well... while James mulls that over... the PCB development continues.
The board is about 50% complete at this time. I expect to be done by
this weekend... and have the first custom boards within two weeks. I
will post a pic or two on the net as soon as I have a few built up.

Follow the development of the VoiceMax Speech Processor at
http://www.telstar-electronics.com/default_files/NewProductDevelopment.htm

U-Know-Who

March 8th 07, 03:10 AM

"Telstar Electronics" > wrote in message
ups.com...
> On Mar 1, 3:39 pm, "Telstar Electronics" >
> wrote:
>> On Mar 1, 7:26 am, james > wrote:
>>
>> > I am waiting with such great anticipation that I can't hardly control
>> > myself.
>>
>> I'm sorry to hear that your incontinence problem still plagues you
>> from time to time...
>>
>> www.telstar-electronics.com
>
>
> Well... while James mulls that over... the PCB development continues.
> The board is about 50% complete at this time. I expect to be done by
> this weekend... and have the first custom boards within two weeks. I
> will post a pic or two on the net as soon as I have a few built up.
>

Oh goody!!!

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

Steveo

March 8th 07, 03:46 AM

"U-Know-Who" > wrote:
>> Oh goody!!!
>
SHAZZAM!

U-Know-Who

March 8th 07, 05:35 AM

"Steveo" > wrote in message
...
> "U-Know-Who" > wrote:
>>> Oh goody!!!
>>
> SHAZZAM!
>

Wazzup Mopar? Doin' ok up there in the snow?

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

Steveo

March 8th 07, 05:47 AM

"U-Know-Who" > wrote:
> "Steveo" > wrote in message
> ...
> > "U-Know-Who" > wrote:
> >>> Oh goody!!!
> >>
> > SHAZZAM!
> >
>
> Wazzup Mopar? Doin' ok up there in the snow?
>
>
Yeah doing fine up here while it's colder than a well diggers ass and
mounds of snow. I wouldn't have it any other way until my hair turns
blue..after that I -may- be convinced that a hurricane, flood, or drought
might be a better place to live out my years.

We're getting ready for $pring now, everyday.

Thanks for asking UKW.

Everything good with you I hope?

U-Know-Who

March 9th 07, 02:29 AM

"Steveo" > wrote in message
...
> "U-Know-Who" > wrote:
>> "Steveo" > wrote in message
>> ...
>> > "U-Know-Who" > wrote:
>> >>> Oh goody!!!
>> >>
>> > SHAZZAM!
>> >
>>
>> Wazzup Mopar? Doin' ok up there in the snow?
>>
>>
> Yeah doing fine up here while it's colder than a well diggers ass and
> mounds of snow. I wouldn't have it any other way until my hair turns
> blue..after that I -may- be convinced that a hurricane, flood, or drought
> might be a better place to live out my years.
>
> We're getting ready for $pring now, everyday.
>
> Thanks for asking UKW.
>
> Everything good with you I hope?
>

All is good here...great weather...70's in the daytime, 40's overnight,
family in town from all over the country, good home cooked food, etc. All in
all, a very nice time here south of H-Town! I'll express you some of the
weather for a fee! :-)

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

Steveo

March 9th 07, 09:32 PM

"U-Know-Who" > wrote:
> "Steveo" > wrote in message
> ...
> > "U-Know-Who" > wrote:
> >> "Steveo" > wrote in message
> >> ...
> >> > "U-Know-Who" > wrote:
> >> >>> Oh goody!!!
> >> >>
> >> > SHAZZAM!
> >> >
> >>
> >> Wazzup Mopar? Doin' ok up there in the snow?
> >>
> >>
> > Yeah doing fine up here while it's colder than a well diggers ass and
> > mounds of snow. I wouldn't have it any other way until my hair turns
> > blue..after that I -may- be convinced that a hurricane, flood, or
> > drought might be a better place to live out my years.
> >
> > We're getting ready for $pring now, everyday.
> >
> > Thanks for asking UKW.
> >
> > Everything good with you I hope?
> >
>
> All is good here...great weather...70's in the daytime, 40's overnight,
> family in town from all over the country, good home cooked food, etc. All
> in all, a very nice time here south of H-Town! I'll express you some of
> the weather for a fee! :-)
>
>
Yeah sounds real good, UKW, were supposed to make it up to sixty degrees by
weds. Time to refresh my farmer tan and freckles! check check

Telstar Electronics

March 15th 07, 12:27 PM

On Mar 13, 6:49 am, "Telstar Electronics" >
wrote:
> The first surface-mount printed circuit board has been finished... and
> is on order. One side of the board can be seen athttp://www.telstar-electronics.com/default_files/NewProductDevelopmen...
> Photos of a completed board and a preliminary specification will be
> available at the web site within ten days. Feel free to email me if
> you have specific questions....

Preliminary specification is now available at http://www.telstar-electronics.com/voicemax.pdf

coming next! Mopeydopey is outed!

March 16th 07, 12:43 AM

On Mar 15, 7:27 am, "Telstar Electronics" >
wrote:
> On Mar 13, 6:49 am, "Telstar Electronics" >
> wrote:
>
> > The first surface-mount printed circuit board has been finished... and
> > is on order. One side of the board can be seen athttp://www.telstar-electronics.com/default_files/NewProductDevelopmen...
> > Photos of a completed board and a preliminary specification will be
> > available at the web site within ten days. Feel free to email me if
> > you have specific questions....
>
> Preliminary specification is now available athttp://www.telstar-electronics.com/voicemax.pdf

A complete piece of garbage made by the skokie skulker

Steveo

March 16th 07, 11:40 AM

http://n8wwm.4t.com/index.html

http://i3.tinypic.com/wiwx1d.jpg

You IS a fugly felon, dogie.

Telstar Electronics

March 16th 07, 05:01 PM

The VoiceMax project is progressing ahead of schedule. I invite all of
you to keep abreast of the continuing progress with this product at
http://www.telstar-electronics.com/default_files/NewProductDevelopment.htm
or see the latest preliminary brochure at http://www.telstar-electronics.com/voicemax.pdf

www.telstar-electronics.com

coming next! Mopeydopey is outed!

March 18th 07, 01:24 AM

On Mar 16, 6:40 am, Steveo > wrote:
> http://n8wwm.4t.com/index.html
>
> http://i3.tinypic.com/wiwx1d.jpg
>
> You IS a fugly felon, dogie.

Why didn't you show up at Dayton? Have to work overtime in the porno
store booths?

AKC will be there again this year, so show yo ass, keyqueen.

coming next! Mopeydopey is outed!

March 18th 07, 01:26 AM

On Mar 16, 12:01 pm, "Telstar Electronics"
> wrote:
> The VoiceMax project is progressing ahead of schedule. I invite all of
> you to keep abreast of the continuing progress with this product athttp://www.telstar-electronics.com/default_files/NewProductDevelopmen...
> or see the latest preliminary brochure athttp://www.telstar-electronics.com/voicemax.pdf
>
> www.telstar-electronics.com

GARBAGE GARBAGE GARBAGE, just like his amps. Without the Motorola RF
Data Manual Griffgarbage would be even worse.
Maybe you should meet mopedopuke at the next pride march and get busy
doing your natural function, instead of selling garbage.

Steveo

March 18th 07, 05:55 AM

"coming next! Mopeydopey is outed!" > wrote:
>> Why didn't you show up at Dayton?
>
I went to the source first. Need a refresher?

http://n8wwm.4t.com/index.html

Invite me over again, go on......I double dogie dare you, you spineless
****stick.

I'll rub your face on the pavement next.

rww93@yahoo.com

March 20th 07, 01:19 AM

On Feb 12, 5:38 am, "Telstar Electronics" >
wrote:
> Trials with the newly designed VoiceMax speech processor module are
> going well. I have the first "hay-wired" prototype in mobile operation
> for about one week now. The reports are all positive. So far, nobody
> believes I'm working a little crappy Cobra19 DX4 with a stock mic...
> except for the trucker that pulled up along side me and saw the stock
> mic for himself. With the proto locked-in at the maximum 15:1
> compression right now... the reports I'm getting say that it's the
> loudest and clearest stock mic they have ever heard. Whether you're
> whispering or screaming... the volume level is exactly the same. Also,
> the noise gate feature works fantastic. It's always been a mobile
> operator's dream to have high audio gain without background noise...
> now that's possible. I plan to start laying out the first all surface
> mount PCB to allow the next prototype unit to be mounted inside the
> radio.
>
> www.telstar-electronics.com

Brian just wanted to let you know that I heard you out on the band
last night, not only were you the loudest radio but you where cyrstal
clear. I think you have a real winner here with this new VoiceMax.

Vinnie S.

March 20th 07, 01:48 AM

On 18 Mar 2007 04:55:36 GMT, Steveo > wrote:

>"coming next! Mopeydopey is outed!" > wrote:
>>> Why didn't you show up at Dayton?
>>
>I went to the source first. Need a refresher?
>
>http://n8wwm.4t.com/index.html
>
>Invite me over again, go on......I double dogie dare you, you spineless
>****stick.
>
>I'll rub your face on the pavement next.

Man-boobs !!! LOL

Vinnie S.

Steveo

March 20th 07, 12:12 PM

Vinnie S. > wrote:
> On 18 Mar 2007 04:55:36 GMT, Steveo > wrote:
>
> >"coming next! Mopeydopey is outed!" > wrote:
> >>> Why didn't you show up at Dayton?
> >>
> >I went to the source first. Need a refresher?
> >
> >http://n8wwm.4t.com/index.html
> >
> >Invite me over again, go on......I double dogie dare you, you spineless
> >****stick.
> >
> >I'll rub your face on the pavement next.
>
> Man-boobs !!! LOL
>
> Vinnie S.
>
Fugly **** wears crisco kathy's dress.

http://i3.tinypic.com/wiwx1d.jpg

Telstar Electronics

March 20th 07, 01:02 PM

On Mar 19, 7:19 pm, wrote:
> On Feb 12, 5:38 am, "Telstar Electronics" >
> wrote:
>
>
>
>
>
> > Trials with the newly designed VoiceMax speech processor module are
> > going well. I have the first "hay-wired" prototype in mobile operation
> > for about one week now. The reports are all positive. So far, nobody
> > believes I'm working a little crappy Cobra19 DX4 with a stock mic...
> > except for the trucker that pulled up along side me and saw the stock
> > mic for himself. With the proto locked-in at the maximum 15:1
> > compression right now... the reports I'm getting say that it's the
> > loudest and clearest stock mic they have ever heard. Whether you're
> > whispering or screaming... the volume level is exactly the same. Also,
> > the noise gate feature works fantastic. It's always been a mobile
> > operator's dream to have high audio gain without background noise...
> > now that's possible. I plan to start laying out the first all surface
> > mount PCB to allow the next prototype unit to be mounted inside the
> > radio.
>
> >www.telstar-electronics.com
>
> Brian just wanted to let you know that I heard you out on the band
> last night, not only were you the loudest radio but you where cyrstal
> clear. I think you have a real winner here with this new VoiceMax.- Hide quoted text -
>
> - Show quoted text -

OK. The first pcbs are scheduled to arrive tomorrow. I hope to have
the first one built by the end of this weekend. I'll then install in
my radio for final testing. I'll let you know when your beta-test unit
is ready.

http://www.telstar-electronics.com/default_files/NewProductDevelopment.htm

Keyclowz gettin' whacked! LOL!!

March 26th 07, 11:25 PM

On Feb 12, 9:38 am, "Telstar Electronics" >
wrote:
> Trials with the newly designed VoiceMax speech processor module are
> going well. I have the first "hay-wired" prototype in mobile operation
> for about one week now. The reports are all positive. So far, nobody
> believes I'm working a little crappy Cobra19 DX4 with a stock mic...
> except for the trucker that pulled up along side me and saw the stock
> mic for himself. With the proto locked-in at the maximum 15:1
> compression right now... the reports I'm getting say that it's the
> loudest and clearest stock mic they have ever heard. Whether you're
> whispering or screaming... the volume level is exactly the same. Also,
> the noise gate feature works fantastic. It's always been a mobile
> operator's dream to have high audio gain without background noise...
> now that's possible. I plan to start laying out the first all surface
> mount PCB to allow the next prototype unit to be mounted inside the
> radio.
>
> www.telstar-electronics.com

GARBAGE

Keyclowz gettin' whacked! LOL!!

March 26th 07, 11:26 PM

On Feb 15, 2:53 pm, "Telstar Electronics" >
wrote:
> The VoiceMax prototype field testing continues. There are no issues at
> this time.
> Several people have emailed me asking questions. Here are some of
> those answers:
> Currently installed in a Cobra19 DX4 with stock mic.
> The VoiceMax module has been set on the prototype at a fixed 15:1
> compression ratio.
> The Cobra19's limiter pot has been adjusted so that the radio will
> maintain a 95% modulation envelope from a whisper... to yelling into
> the mic. (statement based on 2" distance from mic)
> The "noise gate" has been adjusted to block all sounds below an input
> level of 1mV from mic. At this level... and with the stock Cobra
> mic... it blocks all tire noise in my vehicle.
> Output of module has been adjusted to match the output of the stock
> mic. (about 40mV @ 1KHz tone)
> The power source for the module is derived from inside the radio and
> is fully regulated. The current draw is around 15mA.
> Attack time of the modules limiter is about 1mS. Decay time has been
> designed to around 500mS.
>
> I plan on starting an FAQ page out at the Telstar Electronics web site
> based on these... and other questions I receive.
>
> Please go tohttp://www.telstar-electronics.com/default_files/VoiceMax.htm
> to see the latest details as they become available.

Garbage!

Keyclowz gettin' whacked! LOL!!

March 26th 07, 11:26 PM

On Feb 19, 2:44 pm, "Telstar Electronics" >
wrote:
> The second prototype unit has been put into mobile operation. We have
> also set up an FAQ regarding this new product athttp://www.telstar-electronics.com/default_files/NewProductDevelopmen...

GARBAGE

Keyclowz gettin' whacked! LOL!!

March 26th 07, 11:26 PM

On Feb 26, 6:46 am, "Telstar Electronics" >
wrote:
> I'm attempting to finalize the feature list for the new VoiceMax
> module. I'm torn between having an adjustment for the compression
> ratio or having a fixed value. What are your feelings? Is an
> adjustment pot for compression a "must"? Thanks for your input.
>
> http://www.telstar-electronics.com/default_files/NewProductDevelopmen...

garbage

Keyclowz gettin' whacked! LOL!!

March 26th 07, 11:26 PM

On Feb 28, 2:55 pm, "Telstar Electronics" >
wrote:
> The VoiceMax project is progressing on schedule and a product release
> date has been set. This date has been set on the conservative side and
> the product could conceivably be released sooner. I invite all of you
> to keep abreast of the continuing progress with this product athttp://www.telstar-electronics.com/default_files/NewProductDevelopmen...

Garbage

Keyclowz gettin' whacked! LOL!!

March 26th 07, 11:27 PM

On Mar 6, 2:17 pm, "Telstar Electronics" >
wrote:
> On Mar 1, 3:39 pm, "Telstar Electronics" >
> wrote:
>
> > On Mar 1, 7:26 am, james > wrote:
>
> > > I am waiting with such great anticipation that I can't hardly control
> > > myself.
>
> > I'm sorry to hear that your incontinence problem still plagues you
> > from time to time...
>
> >www.telstar-electronics.com
>
> Well... while James mulls that over... the PCB development continues.
> The board is about 50% complete at this time. I expect to be done by
> this weekend... and have the first custom boards within two weeks. I
> will post a pic or two on the net as soon as I have a few built up.
>
> Follow the development of the VoiceMax Speech Processor athttp://www.telstar-electronics.com/default_files/NewProductDevelopmen...

garbage

Telstar Electronics

March 27th 07, 11:53 AM

The first pre-production pcb has been built and put into service.
Pictures of this board are now available at
http://www.telstar-electronics.com/default_files/NewProductDevelopment.htm
Several other additional boards will be built and put in service
within the next two weeks. After this pre-production pilot... final
adjustments will be made to the pcb to allow for easier/better
manufacturing before the final pcb is released.

P.S. I may be looking for several radio techs in the next few months
that would agree to do some beta testing. Email me with your
qualifications to be considered. The beta units will be free of
charge... and I would only expect a detailed performance report in
return.

www.telstar-electronics.com

Telstar Electronics

March 27th 07, 03:47 PM

> Why do you sell a rf amplifier that covers "26-30MHz Coverage"
> It sounds like you are selling a CB amp which I thought was illegal.
> Just curious, Thanks

We have no control how our amplifiers are used. They are primarily
designed for medical, acousto-optic, and laser applications like are
shown at http://www.neostech.com/PDFs/drivers%20for%2025WQs.htm

Thanks for your question.

www.telstar-electronics.com

Telstar Electronics

March 29th 07, 07:34 PM

Thanks for your continued interest in the VoiceMax speech processor.
See the latest information regarding this product at
http://www.telstar-electronics.com/default_files/NewProductDevelopment.htm

Keyclowz gettin' whacked! LOL!!

March 31st 07, 03:10 PM

On Mar 29, 1:34 pm, "Telstar Electronics" >
wrote:
> Thanks for your continued interest in the VoiceMax speech processor.
> See the latest information regarding this product athttp://www.telstar-electronics.com/default_files/NewProductDevelopmen...

garbage

Keyclowz gettin' whacked! LOL!!

March 31st 07, 03:11 PM

On Mar 27, 5:53 am, "Telstar Electronics" >
wrote:
> The first pre-production pcb has been built and put into service.
> Pictures of this board are now available athttp://www.telstar-electronics.com/default_files/NewProductDevelopmen...
> Several other additional boards will be built and put in service
> within the next two weeks. After this pre-production pilot... final
> adjustments will be made to the pcb to allow for easier/better
> manufacturing before the final pcb is released.
>
> P.S. I may be looking for several radio techs in the next few months
> that would agree to do some beta testing. Email me with your
> qualifications to be considered. The beta units will be free of
> charge... and I would only expect a detailed performance report in
> return.
>
> www.telstar-electronics.com

garbage

Keyclowz gettin' whacked! LOL!!

March 31st 07, 03:11 PM

Keyclowz gettin' whacked! LOL!!

March 31st 07, 03:12 PM

Telstar Electronics

April 1st 07, 01:25 AM

Thanks for your continued interest in VoiceMax...

http://www.telstar-electronics.com/

Peter

May 7th 07, 03:46 PM

"Telstar Electronics" > wrote...
>
> We have no control how our amplifiers are used. They are primarily
> designed for medical, acousto-optic, and laser applications like are
> shown at http://www.neostech.com/PDFs/drivers%20for%2025WQs.htm

Ever thought of becoming a politician?

> Thanks for your question.

You may also try starting with the old favorite,
"I'm glad you asked that"

:~)
Peter.
http://www.citizensband.radiouk.com/

Peter

May 7th 07, 03:50 PM

* Cross-posting removed...

"Telstar Electronics" > wrote...
>
> P.S. I may be looking for several radio techs in the next few months
> that would agree to do some beta testing. Email me with your
> qualifications to be considered.

Do we get to see your qualifications?
I'll show you mine, if you show me yours... but not in public, lest we get
arrested.

:~)
Peter.
http://www.citizensband.radiouk.com/