Any mobiles with RX in 500mhz?

[VHFRadioBuff]

Hello all. I was wondering if anyone knew of any mobile radios (either 2m/70cm
or 2m only) with RX in the 500mhz range.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
73! de Andy KC2SSB - WPYI880 (GMRS)
Beachwood, NJ USA! Grid FM29vw
http://vhfradiobuff.tripod.com

[Skipp]

Hi Andy,

Not only will a lot of amateur gear go into 500Mhz, but I have some
commercial two-way radios (Kenwood TK-840) that are legal for operation
there as sold. Programmed with pc software.

$170 each
www.radiowrench.com
skipp

: VHFRadioBuff > wrote:
: Hello all. I was wondering if anyone knew of any mobile radios (either 2m/70cm
: or 2m only) with RX in the 500mhz range.
: =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
: 73! de Andy KC2SSB - WPYI880 (GMRS)
: Beachwood, NJ USA! Grid FM29vw
: http://vhfradiobuff.tripod.com

[Skipp]

Hi Andy,

Not only will a lot of amateur gear go into 500Mhz, but I have some
commercial two-way radios (Kenwood TK-840) that are legal for operation
there as sold. Programmed with pc software.

$170 each
www.radiowrench.com
skipp

: VHFRadioBuff > wrote:
: Hello all. I was wondering if anyone knew of any mobile radios (either 2m/70cm
: or 2m only) with RX in the 500mhz range.
: =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
: 73! de Andy KC2SSB - WPYI880 (GMRS)
: Beachwood, NJ USA! Grid FM29vw
: http://vhfradiobuff.tripod.com

[VHFRadioBuff]

> Yaesu & Alinco have mobiles that can do that.

Do you have model numbers? All the amateur gear for 2m/70cm or 2m monoband all
seem to top off at 470mhz.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
73! de Andy KC2SSB - WPYI880 (GMRS)
Beachwood, NJ USA! Grid FM29vw
http://vhfradiobuff.tripod.com

[VHFRadioBuff]

> Yaesu & Alinco have mobiles that can do that.

Do you have model numbers? All the amateur gear for 2m/70cm or 2m monoband all
seem to top off at 470mhz.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
73! de Andy KC2SSB - WPYI880 (GMRS)
Beachwood, NJ USA! Grid FM29vw
http://vhfradiobuff.tripod.com

[VHFRadioBuff]

>Not only will a lot of amateur gear go into 500Mhz, but I have some
>commercial two-way radios (Kenwood TK-840) that are legal for operation
>there as sold. Programmed with pc software.

I need a radio that can TX on 2m with general RX on 500 mhz. I have yet to find
one amateur radio that can do that. The dualbanders all seem to have a top RX
range of around 470 mhz and I haven't found a 2m monoband radio that can RX
outside of VHF.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
73! de Andy KC2SSB - WPYI880 (GMRS)
Beachwood, NJ USA! Grid FM29vw
http://vhfradiobuff.tripod.com

[VHFRadioBuff]

>Not only will a lot of amateur gear go into 500Mhz, but I have some
>commercial two-way radios (Kenwood TK-840) that are legal for operation
>there as sold. Programmed with pc software.

I need a radio that can TX on 2m with general RX on 500 mhz. I have yet to find
one amateur radio that can do that. The dualbanders all seem to have a top RX
range of around 470 mhz and I haven't found a 2m monoband radio that can RX
outside of VHF.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
73! de Andy KC2SSB - WPYI880 (GMRS)
Beachwood, NJ USA! Grid FM29vw
http://vhfradiobuff.tripod.com

[Robert Grizzard]

VHFRadioBuff > wrote:


> >Not only will a lot of amateur gear go into 500Mhz, but I have some
> >commercial two-way radios (Kenwood TK-840) that are legal for operation
> >there as sold. Programmed with pc software.

> I need a radio that can TX on 2m with general RX on 500 mhz. I have yet to find
> one amateur radio that can do that. The dualbanders all seem to have a top RX
> range of around 470 mhz and I haven't found a 2m monoband radio that can RX
> outside of VHF.

http://www.icomamerica.com/amateur/dualmobile/ic208h.html

http://www.icomamerica.com/amateur/dualmobile/ic2720main.html

HTH

[Robert Grizzard]

VHFRadioBuff > wrote:


> >Not only will a lot of amateur gear go into 500Mhz, but I have some
> >commercial two-way radios (Kenwood TK-840) that are legal for operation
> >there as sold. Programmed with pc software.

> I need a radio that can TX on 2m with general RX on 500 mhz. I have yet to find
> one amateur radio that can do that. The dualbanders all seem to have a top RX
> range of around 470 mhz and I haven't found a 2m monoband radio that can RX
> outside of VHF.

http://www.icomamerica.com/amateur/dualmobile/ic208h.html

http://www.icomamerica.com/amateur/dualmobile/ic2720main.html

HTH

[VHFRadioBuff]

>http://www.icomamerica.com/amateur/dualmobile/ic208h.html
>
>http://www.icomamerica.com/amateur/dualmobile/ic2720main.html

I really just need a radio that can TX on 2m (a monobander) and RX in the 500
mhz range. I don't need nor do I want a dualbander for this application. I
should have clairified that at the begining, but I guess I didn't really know
what I wanted then...

So, does anyone know of any 2m mobiles (NOT DUALBANDERS) that can RX in the 500
mhz range?
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
73! de Andy KC2SSB - WPYI880 (GMRS)
Beachwood, NJ USA! Grid FM29vw
http://vhfradiobuff.tripod.com

[VHFRadioBuff]

>http://www.icomamerica.com/amateur/dualmobile/ic208h.html
>
>http://www.icomamerica.com/amateur/dualmobile/ic2720main.html

I really just need a radio that can TX on 2m (a monobander) and RX in the 500
mhz range. I don't need nor do I want a dualbander for this application. I
should have clairified that at the begining, but I guess I didn't really know
what I wanted then...

So, does anyone know of any 2m mobiles (NOT DUALBANDERS) that can RX in the 500
mhz range?
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
73! de Andy KC2SSB - WPYI880 (GMRS)
Beachwood, NJ USA! Grid FM29vw
http://vhfradiobuff.tripod.com

[Bob Miller]

On 27 Nov 2003 14:08:00 GMT, (VHFRadioBuff)
wrote:

>>http://www.icomamerica.com/amateur/dualmobile/ic208h.html
>>
>>http://www.icomamerica.com/amateur/dualmobile/ic2720main.html
>
>I really just need a radio that can TX on 2m (a monobander) and RX in the 500
>mhz range. I don't need nor do I want a dualbander for this application. I
>should have clairified that at the begining, but I guess I didn't really know
>what I wanted then...
>
>So, does anyone know of any 2m mobiles (NOT DUALBANDERS) that can RX in the 500
>mhz range?

There's not really any reason for a 144 mhz tr/rc rig to receive in
the 500 mhz range, so it may be a stretch to find such a rig. Dual
banders, working as high as 440-or-so mhz don't find it that much of
an electrical stretch...

Bob
k5qwg


>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
>73! de Andy KC2SSB - WPYI880 (GMRS)
>Beachwood, NJ USA! Grid FM29vw
>http://vhfradiobuff.tripod.com

[Bob Miller]

On 27 Nov 2003 14:08:00 GMT, (VHFRadioBuff)
wrote:

>>http://www.icomamerica.com/amateur/dualmobile/ic208h.html
>>
>>http://www.icomamerica.com/amateur/dualmobile/ic2720main.html
>
>I really just need a radio that can TX on 2m (a monobander) and RX in the 500
>mhz range. I don't need nor do I want a dualbander for this application. I
>should have clairified that at the begining, but I guess I didn't really know
>what I wanted then...
>
>So, does anyone know of any 2m mobiles (NOT DUALBANDERS) that can RX in the 500
>mhz range?

There's not really any reason for a 144 mhz tr/rc rig to receive in
the 500 mhz range, so it may be a stretch to find such a rig. Dual
banders, working as high as 440-or-so mhz don't find it that much of
an electrical stretch...

Bob
k5qwg


>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
>73! de Andy KC2SSB - WPYI880 (GMRS)
>Beachwood, NJ USA! Grid FM29vw
>http://vhfradiobuff.tripod.com

[VHFRadioBuff]

>There's not really any reason for a 144 mhz tr/rc rig to receive in
>the 500 mhz range, so it may be a stretch to find such a rig. Dual
>banders, working as high as 440-or-so mhz don't find it that much of
>an electrical stretch...

There is actually - if I don't want a seperate scanner to receive the 500mhz
frequencies I want to listen to. Why not have a 2m rig that also has RX
capabilities like a scanner?
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
73! de Andy KC2SSB - WPYI880 (GMRS)
Beachwood, NJ USA! Grid FM29vw
http://vhfradiobuff.tripod.com

[VHFRadioBuff]

>There's not really any reason for a 144 mhz tr/rc rig to receive in
>the 500 mhz range, so it may be a stretch to find such a rig. Dual
>banders, working as high as 440-or-so mhz don't find it that much of
>an electrical stretch...

There is actually - if I don't want a seperate scanner to receive the 500mhz
frequencies I want to listen to. Why not have a 2m rig that also has RX
capabilities like a scanner?
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
73! de Andy KC2SSB - WPYI880 (GMRS)
Beachwood, NJ USA! Grid FM29vw
http://vhfradiobuff.tripod.com

[Dave Platt]

>>There's not really any reason for a 144 mhz tr/rc rig to receive in
>>the 500 mhz range

#snip#

>There is actually - if I don't want a seperate scanner to receive the 500mhz
>frequencies I want to listen to. Why not have a 2m rig that also has RX
>capabilities like a scanner?

I think you misread his answer. I'd interpret/expand what I think he
was trying to say as:

"A 144 mhz tr/rc single-band rig will probably be designed with
electronics which are optimized for this single task, for both cost
and performance reasons. Adding a wideband receive capability to
this sort of rig would change the technical requirements, and would
probably either increase the cost or decrease the 144 MHz
performance. There may not be enough of a market for this sort of
somewhat-specialized rig, and thus you may find that no
manufacturer has found it cost-effective to market such a product.

A dual-band amateur rig, which has to go up to 440 anyhow, would
need less modification of its design to be stretched to 500 MHz,
and doing might not increase its cost or decrease its performance
appreciably.

Hence, you're much more likely to find 500 MHz receive capability
in a dualband rig, than in a 2-meter monobander."

There's no question that one *can* design a 2-meter rig with wideband
receive. There's no question that this is what you, personally, want.
There seems to be a big question as to whether enough people want that
combination, for you to be able to find an actual, off-the-shelf
commercial rig of this type on the market today.

--
Dave Platt > AE6EO
Hosting the Jade Warrior home page: http://www.radagast.org/jade-warrior
I do _not_ wish to receive unsolicited commercial email, and I will
boycott any company which has the gall to send me such ads!

[Dave Platt]

>>There's not really any reason for a 144 mhz tr/rc rig to receive in
>>the 500 mhz range

#snip#

>There is actually - if I don't want a seperate scanner to receive the 500mhz
>frequencies I want to listen to. Why not have a 2m rig that also has RX
>capabilities like a scanner?

I think you misread his answer. I'd interpret/expand what I think he
was trying to say as:

"A 144 mhz tr/rc single-band rig will probably be designed with
electronics which are optimized for this single task, for both cost
and performance reasons. Adding a wideband receive capability to
this sort of rig would change the technical requirements, and would
probably either increase the cost or decrease the 144 MHz
performance. There may not be enough of a market for this sort of
somewhat-specialized rig, and thus you may find that no
manufacturer has found it cost-effective to market such a product.

A dual-band amateur rig, which has to go up to 440 anyhow, would
need less modification of its design to be stretched to 500 MHz,
and doing might not increase its cost or decrease its performance
appreciably.

Hence, you're much more likely to find 500 MHz receive capability
in a dualband rig, than in a 2-meter monobander."

There's no question that one *can* design a 2-meter rig with wideband
receive. There's no question that this is what you, personally, want.
There seems to be a big question as to whether enough people want that
combination, for you to be able to find an actual, off-the-shelf
commercial rig of this type on the market today.

--
Dave Platt > AE6EO
Hosting the Jade Warrior home page: http://www.radagast.org/jade-warrior
I do _not_ wish to receive unsolicited commercial email, and I will
boycott any company which has the gall to send me such ads!

[vhfradiobuff]

Just a follow up on this, if anyone was interested (and for the
archives in case anyone else is looking for this!). I found a radio
that is a 2m mobile and has receive capabilities in UHF and even up
into 800mhz. The Yaesu FT-3000. I found a used one that I will be
buying!

(Dave Platt) wrote in message >...
> "A 144 mhz tr/rc single-band rig will probably be designed with
> electronics which are optimized for this single task, for both cost
> and performance reasons. Adding a wideband receive capability to
> this sort of rig would change the technical requirements, and would
> probably either increase the cost or decrease the 144 MHz
> performance. There may not be enough of a market for this sort of
> somewhat-specialized rig, and thus you may find that no
> manufacturer has found it cost-effective to market such a product.
>
> A dual-band amateur rig, which has to go up to 440 anyhow, would
> need less modification of its design to be stretched to 500 MHz,
> and doing might not increase its cost or decrease its performance
> appreciably.
>
> Hence, you're much more likely to find 500 MHz receive capability
> in a dualband rig, than in a 2-meter monobander."
>
> There's no question that one *can* design a 2-meter rig with wideband
> receive. There's no question that this is what you, personally, want.
> There seems to be a big question as to whether enough people want that
> combination, for you to be able to find an actual, off-the-shelf
> commercial rig of this type on the market today.

[vhfradiobuff]

Just a follow up on this, if anyone was interested (and for the
archives in case anyone else is looking for this!). I found a radio
that is a 2m mobile and has receive capabilities in UHF and even up
into 800mhz. The Yaesu FT-3000. I found a used one that I will be
buying!

(Dave Platt) wrote in message >...
> "A 144 mhz tr/rc single-band rig will probably be designed with
> electronics which are optimized for this single task, for both cost
> and performance reasons. Adding a wideband receive capability to
> this sort of rig would change the technical requirements, and would
> probably either increase the cost or decrease the 144 MHz
> performance. There may not be enough of a market for this sort of
> somewhat-specialized rig, and thus you may find that no
> manufacturer has found it cost-effective to market such a product.
>
> A dual-band amateur rig, which has to go up to 440 anyhow, would
> need less modification of its design to be stretched to 500 MHz,
> and doing might not increase its cost or decrease its performance
> appreciably.
>
> Hence, you're much more likely to find 500 MHz receive capability
> in a dualband rig, than in a 2-meter monobander."
>
> There's no question that one *can* design a 2-meter rig with wideband
> receive. There's no question that this is what you, personally, want.
> There seems to be a big question as to whether enough people want that
> combination, for you to be able to find an actual, off-the-shelf
> commercial rig of this type on the market today.