FT1000D extended TX [Archive]

PA3HGT

January 3rd 04, 06:22 PM

Hello,

I own a Yaesu FT1000D with firmware 6.00 and want to do the mod extended TX
but i do not succeed yet.
I followed the mod on mods.dk but no succes.
I saw the jumper 3 soldered already but do i've to remove the jumper ?
Is there another URL for info ?

Kind regards

--
Met vriendelijke groet,

Hans Pluijgers
HAMcall: PA3HGT

http://www.qsl.net/pa3hgt/

Marco S Hyman

January 4th 04, 09:36 PM

"PA3HGT" > writes:

> I saw the jumper 3 soldered already but do i've to remove the jumper ?

Yes. The solder ball is the jumper. Remove it. The tranciever still
lights the GEN light when out of it's programmed bands, but will transmit.
Be careful.

// marc

Marco S Hyman

January 4th 04, 09:36 PM

"PA3HGT" > writes:

> I saw the jumper 3 soldered already but do i've to remove the jumper ?

Yes. The solder ball is the jumper. Remove it. The tranciever still
lights the GEN light when out of it's programmed bands, but will transmit.
Be careful.

// marc

Marco S Hyman

January 5th 04, 01:56 AM

I wrote:

> "PA3HGT" > writes:
>
> > I saw the jumper 3 soldered already but do i've to remove the jumper ?
>
> Yes. The solder ball is the jumper. Remove it. The tranciever still
> lights the GEN light when out of it's programmed bands, but will transmit.
> Be careful.

Or do I have it backwards and you need to add a solder ball? Damn, I
forget which way it was. In any case reverse it. If the pads are
connected remove the solder ball, if not connected then add one.

// marc

Marco S Hyman

January 5th 04, 01:56 AM

I wrote:

> "PA3HGT" > writes:
>
> > I saw the jumper 3 soldered already but do i've to remove the jumper ?
>
> Yes. The solder ball is the jumper. Remove it. The tranciever still
> lights the GEN light when out of it's programmed bands, but will transmit.
> Be careful.

Or do I have it backwards and you need to add a solder ball? Damn, I
forget which way it was. In any case reverse it. If the pads are
connected remove the solder ball, if not connected then add one.

// marc

PA3HGT

January 5th 04, 08:08 PM

I removed the jumper and it's now fullrange TX.
In the schematic diagram is JP3 open ..... mistake of Yaesu ?
Thanks Marco for the info.

"PA3HGT" > schreef in bericht
. nl...
> Hello,
>
> I own a Yaesu FT1000D with firmware 6.00 and want to do the mod extended
TX
> but i do not succeed yet.
> I followed the mod on mods.dk but no succes.
> I saw the jumper 3 soldered already but do i've to remove the jumper ?
> Is there another URL for info ?
>
> Kind regards
>
> --
> Met vriendelijke groet,
>
> Hans Pluijgers
> HAMcall: PA3HGT
>
> http://www.qsl.net/pa3hgt/
>
>

PA3HGT

January 5th 04, 08:08 PM

I removed the jumper and it's now fullrange TX.
In the schematic diagram is JP3 open ..... mistake of Yaesu ?
Thanks Marco for the info.

"PA3HGT" > schreef in bericht
. nl...
> Hello,
>
> I own a Yaesu FT1000D with firmware 6.00 and want to do the mod extended
TX
> but i do not succeed yet.
> I followed the mod on mods.dk but no succes.
> I saw the jumper 3 soldered already but do i've to remove the jumper ?
> Is there another URL for info ?
>
> Kind regards
>
> --
> Met vriendelijke groet,
>
> Hans Pluijgers
> HAMcall: PA3HGT
>
> http://www.qsl.net/pa3hgt/
>
>