Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old July 12th 04, 11:40 AM
d3951pn1
 
Posts: n/a
Default FM Sensitivity of Sangean ATS-818cs?

Hi,

Could anyone provide the information regarding the Sangean ATS-818cs's
sensitivity for FM reception in either uV-300ohms, uV-75ohms or dBf. Any
information is much appreciated.

Thanks in advance,


  #2   Report Post  
Old July 12th 04, 05:08 PM
Beloved Leader
 
Posts: n/a
Default

"d3951pn1" wrote in message ...


ATS-818cs's sensitivity for FM reception



I have the similar Radio Shack DX-392. That information is not in the
owner's manual.
  #3   Report Post  
Old July 14th 04, 06:19 AM
WShoots1
 
Posts: n/a
Default

I also have the service manual (for the DX-392).

FM sensitivity is shown as...

Maximum, throughout the band, the limit is 18dbu

Usable (S/N 30db) throughout the band:
Nominal is18 dbu
Limit is 24 dbu

Bill, K5BY
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Sangean U1 arrived today lsmyer Shortwave 0 June 11th 04 02:21 AM
FS:Radio Shack dx-392 same as Sangean 818Cs ArDyno Shortwave 0 February 27th 04 05:05 PM
Sangean WR 1 ... MW sensitivity? Bob Shortwave 2 February 26th 04 03:23 AM
FS:Radio Shack dx-392 same as Sangean 818Cs ArDyno Shortwave 0 February 16th 04 01:39 AM
Problem with Radio Shack DX-392 (SANGEAN 818CS) Warpcore Shortwave 5 September 15th 03 05:24 AM


All times are GMT +1. The time now is 05:08 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017