Yupitaru problem

[mlipin@gmail.com]

I accidentaly dropped my Yupitaru 9000. Now when I turn it on - keys do
not work, backlight stays on, backlinght icon and selected bank are
flashing.

Any suggestions?

[Michael]

WHoops... typo. Yupiteru

[Al Gillis]

I'm kind of in the same boat...

My MVT-7100 went TU a few weeks ago (that would be "transistors up",
wouldn't it?!?). I bought it several years ago from Javiation and wrote to
Jonathan but never heard back.

Anyone know where I might get this radion repaired?

Also... at "Strong Signals" (http://www.strongsignals.net) you can order a
MVT-7100 or MVT-9000 owners manual written for mortals. That's an
intersting site!


> wrote in message
oups.com...
> I accidentaly dropped my Yupitaru 9000. Now when I turn it on - keys do
> not work, backlight stays on, backlinght icon and selected bank are
> flashing.
>
> Any suggestions?
>

[Bill Crocker]

Don't worry about it...nobody can pronounce it either!

Bill Crocker


"Michael" > wrote in message
oups.com...
> WHoops... typo. Yupiteru
>

[Bill Crocker]

Michael:

Have you tried removing the batteries for awhile? Sometimes microprocessors
can get confused, and lock-up. The only way to clear them, is to totally
remove power for a few minutes.

I also found this info searching the groups with Google, might be of some
help:

Demonstration mode : Press C/AC + BS & Power on
MVT-9000 Test Mode : Press LAMP + MONI + LOCK & Power on


NB. Accessing either of these modes will ERASE all stored memory
information. The only way to get out of Test Mode is to either switch
off and go into demo mode then off and on again or to do a complete
reset (C/AC + ENT & Power on).

Good luck!



Bill Crocker




> wrote in message
oups.com...
>I accidentaly dropped my Yupitaru 9000. Now when I turn it on - keys do
> not work, backlight stays on, backlinght icon and selected bank are
> flashing.
>
> Any suggestions?
>

[Ray Colvill]

Nevada radio had all the spares i wanted for the 9000

www.nevada.co.uk


Protected by GIANT Company's Spam Inspector
The most powerful anti-spam software available.
http://mail.spaminspector.com


"Bill Crocker" > wrote in message
...
> Michael:
>
> Have you tried removing the batteries for awhile? Sometimes
> microprocessors can get confused, and lock-up. The only way to clear
> them, is to totally remove power for a few minutes.
>
> I also found this info searching the groups with Google, might be of some
> help:
>
> Demonstration mode : Press C/AC + BS & Power on
> MVT-9000 Test Mode : Press LAMP + MONI + LOCK & Power on
>
>
> NB. Accessing either of these modes will ERASE all stored memory
> information. The only way to get out of Test Mode is to either switch
> off and go into demo mode then off and on again or to do a complete
> reset (C/AC + ENT & Power on).
>
> Good luck!
>
>
>
> Bill Crocker
>
>
>
>
> > wrote in message
> oups.com...
>>I accidentaly dropped my Yupitaru 9000. Now when I turn it on - keys do
>> not work, backlight stays on, backlinght icon and selected bank are
>> flashing.
>>
>> Any suggestions?
>>
>
>

[PromaBoss]

soooounds lkie its fkured

"Ray Colvill" > wrote in message
...
> Nevada radio had all the spares i wanted for the 9000
>
> www.nevada.co.uk
>
>
> Protected by GIANT Company's Spam Inspector
> The most powerful anti-spam software available.
> http://mail.spaminspector.com
>
>
> "Bill Crocker" > wrote in message
> ...
>> Michael:
>>
>> Have you tried removing the batteries for awhile? Sometimes
>> microprocessors can get confused, and lock-up. The only way to clear
>> them, is to totally remove power for a few minutes.
>>
>> I also found this info searching the groups with Google, might be of some
>> help:
>>
>> Demonstration mode : Press C/AC + BS & Power on
>> MVT-9000 Test Mode : Press LAMP + MONI + LOCK & Power on
>>
>>
>> NB. Accessing either of these modes will ERASE all stored memory
>> information. The only way to get out of Test Mode is to either switch
>> off and go into demo mode then off and on again or to do a complete
>> reset (C/AC + ENT & Power on).
>>
>> Good luck!
>>
>>
>>
>> Bill Crocker
>>
>>
>>
>>
>> > wrote in message
>> oups.com...
>>>I accidentaly dropped my Yupitaru 9000. Now when I turn it on - keys do
>>> not work, backlight stays on, backlinght icon and selected bank are
>>> flashing.
>>>
>>> Any suggestions?
>>>
>>
>>
>
>

[miso@sushi.com]

Javiation used to have top notch service but it seems to have become a
black hole.

[Jonathan Clough, Javiation, Bradford, UK]

In article >, Al Gillis >
writes

Hi,

>My MVT-7100 went TU a few weeks ago (that would be "transistors up",
>wouldn't it?!?). I bought it several years ago from Javiation and wrote to
>Jonathan but never heard back.

Sorry about that - do you want to send your mail again as I can't see
anything from the address used in your newsgroup post but you may have
used a different one for direct communication.

--
Cheers,
JC
Javiation - Scanners & receivers from all the leading manufacturers
Telephone 01274 639503 International: +44 1274 639503
http://www.javiation.co.uk

[wayne]

If it has a reset button try that.It will be a real small hole.You'll have
to use a paperclip or something like that.My Yupiteru mvt7200 has one.

[Zombie]

I would take it apart and inspect for cracked PCB. Since its physical
trauma, if there is another cause then it will probably make itself evident
the moment you take the cover off.

> wrote in message
oups.com...
> I accidentaly dropped my Yupitaru 9000. Now when I turn it on - keys do
> not work, backlight stays on, backlinght icon and selected bank are
> flashing.
>
> Any suggestions?
>