QUESTION PLEASE

[The Tube Man]

On many of the older tube type base radios, there is a capacitor (like a
4uf) on each the pins of the mic connector...like on a 4 pin mic male
connector there might be 4 each caps, wired in series, with a leg of the
cap wired to one of the pins with one leg of the caps going to ground.

Question is:
1-why is this done
2-what is this suppose to do
3- if the caps are not used what will be the outcome

Thanx!!

[-ex-]

The Tube Man wrote:
> On many of the older tube type base radios, there is a capacitor (like a
> 4uf) on each the pins of the mic connector...like on a 4 pin mic male
> connector there might be 4 each caps, wired in series, with a leg of the
> cap wired to one of the pins with one leg of the caps going to ground.
>
> Question is:
> 1-why is this done
> 2-what is this suppose to do
> 3- if the caps are not used what will be the outcome
>
> Thanx!!
>
>
>
I'm assuming rf bypassing but 4uf would be extremely high. That would
bleed off any audio as well.

-Bill