WTB 455 IF

[Bill Powell]

I'm looking for a 455 kc IF transformer - tube type please.
Specifically, it's to replace the 1st 455 IF in an HQ-170.

Thanks,
Bill - WB1GOT

[Scott Dorsey]

In article >,
Bill Powell > wrote:
>I'm looking for a 455 kc IF transformer - tube type please.
>Specifically, it's to replace the 1st 455 IF in an HQ-170.

You might want to use a Hammarlund one. But if you can live with a
generic replacement, Cain Electronics in Norfolk, VA has a bunch.
And Antique Electronics Supply in Arizona often has some.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."

[Scott Dorsey]

In article >,
Bill Powell > wrote:
>I'm looking for a 455 kc IF transformer - tube type please.
>Specifically, it's to replace the 1st 455 IF in an HQ-170.

You might want to use a Hammarlund one. But if you can live with a
generic replacement, Cain Electronics in Norfolk, VA has a bunch.
And Antique Electronics Supply in Arizona often has some.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."

[K3HVG]

Bill, can you give me the H part number off the bad can. I cannibalized
several HQ's and I may well have the can you need. de K3HVG

Bill Powell wrote:
> I'm looking for a 455 kc IF transformer - tube type please.
> Specifically, it's to replace the 1st 455 IF in an HQ-170.
>
> Thanks,
> Bill - WB1GOT
>

[K3HVG]

Bill, can you give me the H part number off the bad can. I cannibalized
several HQ's and I may well have the can you need. de K3HVG

Bill Powell wrote:
> I'm looking for a 455 kc IF transformer - tube type please.
> Specifically, it's to replace the 1st 455 IF in an HQ-170.
>
> Thanks,
> Bill - WB1GOT
>

[Gary Schafer]

Would you have any of the small bar knobs ?

Thanks
Gary K4FMX

On Mon, 22 Nov 2004 18:49:33 -0500, K3HVG > wrote:

>Bill, can you give me the H part number off the bad can. I cannibalized
>several HQ's and I may well have the can you need. de K3HVG
>
>Bill Powell wrote:
>> I'm looking for a 455 kc IF transformer - tube type please.
>> Specifically, it's to replace the 1st 455 IF in an HQ-170.
>>
>> Thanks,
>> Bill - WB1GOT
>>

[Gary Schafer]

Would you have any of the small bar knobs ?

Thanks
Gary K4FMX

On Mon, 22 Nov 2004 18:49:33 -0500, K3HVG > wrote:

>Bill, can you give me the H part number off the bad can. I cannibalized
>several HQ's and I may well have the can you need. de K3HVG
>
>Bill Powell wrote:
>> I'm looking for a 455 kc IF transformer - tube type please.
>> Specifically, it's to replace the 1st 455 IF in an HQ-170.
>>
>> Thanks,
>> Bill - WB1GOT
>>