hi all, i have read all i can find (which is prob not as much as most
of you out there but hey , its a start) about the place to "tap" but i
am not too sure which pin that would be . does anyone have a pic of a
modded 2035 or have a visual aid to which pin/pins i should attach my
wires too. any help would be great on this and i do meany "ANY" thanks
for taking the time to read this and thanks in advance for any help.







hb...

On 8 Oct 2005 16:19:11 -0700, said in
rec.radio.scanner:

hi all, i have read all i can find (which is prob not as much as most
of you out there but hey , its a start) about the place to "tap" but i
am not too sure which pin that would be . does anyone have a pic of a
modded 2035 or have a visual aid to which pin/pins i should attach my
wires too. any help would be great on this and i do meany "ANY" thanks
for taking the time to read this and thanks in advance for any help.

You take the tap from IC2 (a TK-10420), pin 9. Sorry, but I have no
pictures.

On 8 Oct 2005 16:19:11 -0700, wrote:

hi all, i have read all i can find (which is prob not as much as most
of you out there but hey , its a start) about the place to "tap" but i
am not too sure which pin that would be . does anyone have a pic of a
modded 2035 or have a visual aid to which pin/pins i should attach my
wires too. any help would be great on this and i do meany "ANY" thanks
for taking the time to read this and thanks in advance for any help.

The PRO-2035 is similar to the PRO-2042. See
http://www.discriminator.nl/pro-2042/index-en.html

Rene

--
Boldly going forward, 'cause we can't find reverse

thank you both very very very much! i am very excited to try this out
and now with the pics i can do it today. is there a difference between
tp1 and tp2? the one in the pics is tp2 but mentions tp1 . is one
better than the other? can i do both? again thank you very very much.

hb...

damn i should have waited to send that other post. i just noticd that
there is infor about
"PRO-2035 NFM/AM (tp2)" and "PRO-2035 WFM (tp1)" and is the 2032 the
same as the 2035??

now i am done. lol sorry about that everyone.
hb...

On 9 Oct 2005 13:32:58 -0700, "hongbitsATgmailDOTcom edited for spam
prevention" wrote:

thank you both very very very much! i am very excited to try this out
and now with the pics i can do it today. is there a difference between
tp1 and tp2? the one in the pics is tp2 but mentions tp1 . is one
better than the other? can i do both? again thank you very very much.

I don't see TP1 mentioned.

Rene


--
Boldly going forward, 'cause we can't find reverse

On 9 Oct 2005 13:38:37 -0700, "hongbitsATgmailDOTcom edited for spam
prevention" said in rec.radio.scanner:

is the 2032 the same as the 2035??

As far as the discriminator chip goes they're the same.

if you look for the pro-2035 on this page:
http://66.102.7.104/search?q=cache:G...ient=firefox-a
you will see 2 listings for the 2035 one ref's the tp1 and the other
the tp2 and they both ref to the 2035 but one is NFM/AM and the other
WFM this is what i am confused about.


hb...

On 10 Oct 2005 12:54:38 -0700, "hongbitsATgmailDOTcom edited for spam
prevention" said in rec.radio.scanner:

if you look for the pro-2035 on this page:
http://66.102.7.104/search?q=cache:G...ient=firefox-a
you will see 2 listings for the 2035 one ref's the tp1 and the other
the tp2 and they both ref to the 2035 but one is NFM/AM and the other
WFM this is what i am confused about.

If you want to tap WFM (broadcast FM band stations - 88-108 MHz) - for
whatever reason (you could decode SCA transmissions, for instance, but
that's illegal in the US), tap the WFM point. For all normal "scanner
discriminator tap" functions, tap the NFM point.

that was the answer i was looking for. thank you very much.

hb.