Awhile back I requested info on this "collectible" late 1970's 40 channel CB. Except for photos and some microphone pin out information the Internet was mostly a black hole for details on this rig. After a couple of days I came across Ken's Electronics web site. They have a cross reference of...

Forsale like new HR 2600 with chipswitch installed. The chip switch adds memory channels allows FM splits and many other features check www.chipswitch.com for info. The radio was bought new used for a year or so and boxed. Its is very clean no scrapes or dents included are the stock mic...

Hi, Does anyone know or have a source for the microphone wiring pin out for a late 1970s Shakespeare Fortress base? This rig has a 5 pin DIN connector. I looked inside and pin 3 is not connected to anything. Back of radio says it was manufactured by Teknika Electronics Corporation, Japan.

You still messing around these parts? What's been happening? Heading through the Carolinas toward the back woods of Virginia scouting for some fall hunting areas and doing some camping. Hit me up on 38 low sometime or shoot me an e-mail. Tried to swing by Jerry Oxenidine's place but he didn't come...

"Who Dat" wrote in message ... On Fri, 18 Dec 2009 03:56:15 +0100 (CET), Anonymous wrote: DC power is for fools! They were saying that in the 80's as well... Who knows but DC is safer for...

Can someone explain to me why superimposing audio on an RF signal... then clipping it... is any better than just clipping an audio signal? Doesn't make any sense to me. They are both clipping and distorting the waveshape... and that's bad!

attention all local cb radio operators as of june 30th 2010 if any local cb radio operator in barrie swears at me there will be a suspension for swearing on the cb radio!!! that will apply to violators who use obscene and profane language i will contact industry canada toronto office to send all cb...

This a public open message to Douglas Adair N8WWM.... Doug, I would advise you if you do not want the wrath of the FBI, the Ohio State Police and the Toledo police on your hide. I would advise you to stop coming to my blog and leaving the stupid messages. I have your IP address and I will share it...

I'm in need of a manual or good copy with the schematic for a Knight C 540. Any one have one of these? Thanks

Last week I picked up a '73 D200 Club Cab, 400/727/D60 (4.10). And lots of rust, of course. Jillions of things to do on it, mostly electrical cause it was used to drag a 5th wheel. But while messing around I tried my test CB and got several pounds of noise. Changes pitch with engine RPM. Don't know...

neat rig with 200w 160-10 (100w on 6m)

30 watt rig, the good and the bad?

If you are looking for a place for your band to play, we have creted a list of new england venues and how to get a gig at each one here is the link http://www.tiedrecords.com/board/phpBB3/viewforum.php?f=19

Are FRS sets close enough to CB, to be on topic, here? -- Christopher A. Young Learn more about Jesus www.lds.org ..

Hi All I'm wondering if anyone has a installation manual for the REDCO DIGI-SCAN, Model RDS-1 for an 858 pll based cb. I would like to install it on my President Adams. happy to pay costs for copying & postage or if scanned copy please email me. Any help is greatly appreciated Paul

has any one here ever used a phone patch on a cb? if so how good did work. thanks.

Hi all! Ive got a Realistic Navaho TRC-492 that I inherited from my grand father but the speaker keeps cutting out. I have to tap the unit and it`ll come back on, tap it again and it cuts out. Ive pulled the whole radio apart but cant find any loose or burned connections, Can any one help?

Is anybody out there still using or collecting old Lafayette Comstat 19's? I always liked that radio & I have a few of them in my collection & was wondering if there were other people who liked them as well.

On Wed, 05 May 2010 17:37:33 -0400, wrote: On Tue, 4 May 2010 23:36:33 +0100, Rusty Ranger wrote: Hi all! Ive got a Realistic Navaho TRC-492 that I inherited from my grand father but the speaker keeps cutting out. I have to tap the...

I HAVE TO FOLLOW THE INDUSTRY CANADA BOOKLET ON THE GENERAL RADIO SERVICE. if any rude local cb radio operator from barrie ontario canada uses profanity while on the cb radio they will be in big trouble. i do not need to put up with any rude local cb radio operator from the barrie area. i will...