Chassis says Model 80 M. No other identification. TIA

Has anyone ever seen one of these?

This is what happens when you have -15C days with sunshine on a dark roof...

On 9/17/2012 8:52 PM, Brenda Dyer wrote: By long, slow process with a heat gun. I won't be putting the original paraffin potting back in. I've bought a bunch of candles to melt down for fresh potting. I have an old Grunow that's been awaiting restoration for years. A grid cap wire...

Here's a shot of the bottom of the chassis I was talking about. I have discovered that the IF can lids come off easily, and that I CAN get to almost every pin on the RF/IF tube sockets. Still no easy way to get to the rectifier socket. Good thing I don't NEED to. BTW.. I got the radio to play....

Here's my latest find. A Bendix 526B. I paid $20 for it. Not bad for Oregon.

Icom PW-1 1KW Amplifier S/N-02309, this amplifier is in excellent condition! 10/12 meter mod done. Includes original box, cables and manuals. Must be a licensed amateur, this will be verified. Feel free to email with any questions. COSTS 1500USD ICOM IC-756PRO III in PERFECT FULL...

Volgens Broadcast Partners werd in de zerobase een frequentie afstand van 400KHz goedgekeurd. Echter bij metingen is gebleken dat er toch nog (lichte) storingen kunnen optreden bij naast liggende frequenties. Toen Omrop Fryslân van Smilde naar Irnsum werd verhuisd, hadden ze metingen verricht op de...

Do you see how they're cheating? This is a Lafayette 12SQ7..

IHRS Spring Meet - Kokomo - MAY 4 and 5, 2012 Kokomo - the Kokomo Quality Inn SAME CITY - NEW LOCATION! Friday, May 4 - 8am to 8 pm, Saturday, May 5 - 8 am to 11 am The Quality Inn Kokomo is located at 1709 East...

I somehow can never seem to get the pics in the proper order... but they should be obvious which is A and which B. I think I've done a pretty decent job reproducing the destroyed dial, with my limited experience and facilities. I am, however, open to constructive criticism.

-- It's easy to think outside the box, when you have a cutting torch.

Every night, every night, no traffic! Where does one look for stuff about radio??? Lynn, W7LTQ

I did my best to make the beast look original, taking a lot of time to strip, sand, restain and repaint the trim. The lid, regardless of how it looks in the pic, is not blond, it's the same as the rest of the cabinet. The veneer patch is not so good, but it IS the first time that I've ever...

This Micro-Tel PR700B receiver is a real dream until you have to lift it. All the bells and whistles are "built-in" and can be controlled from the front panel or via a 60-pin IEEE-488 connection on the rear panel. Panoramic adapter, USB, LSB, CW, AM and FM demodulators plus a sub-carrier decoder...

Anyone know what it's FOR? Says Pacent Adapter, and was between one the 71's and the socket in a Bosch 28 I got in today. -- Say no to institutionalized interference. Just say NO to HD/IBOC!

This is the schematic portion with the divider resistor in it.. note there is NO part number and NO part values listed... also a photo of the open resistor itself. There are some markings on the resistor: Hardwick Hindle Inc. Part No. 1,?00,167 (I think that ? may be a zero) -- Say no to...