View Single Post
  #3   Report Post  
Old June 27th 04, 03:25 AM
Totalrod
 
Posts: n/a
Default

"carl wesser" wrote in message ...
if you are careful,, look on top of the meter inside radio. there is a very
small brass screw. this is the needle pivot bearing. heat the glue holding
screw, and turn c.c.w. about 1/8 turn.. this usually frees up the movement

behold ,,how good and pleasant for brethren to dwell together in unity

Carl's cb shop
Hollywood, Alabama
fffffffffffffffffffffffffffffffffffff

Thanks Carl,
I'll give that a try!

Bryan