View Single Post
  #3   Report Post  
Old July 10th 04, 12:54 PM
Harold E. Johnson
 
Posts: n/a
Default



Nevermind...I found the technical data sheets on the web. Is is NOT
conductive after set up. It has iron filings in it, but since it is an
epoxy, it is not conductive. The good news is that it CAN be drilled,
tapped, machined, etc., just like any metal could be...the mounting
screws should provide the "ground" connection once they are screwed into
the waveguide itself.

Scott
N0EDV


THAT ought to provide a little inductance at 10 GHz.

W4ZCB

The SMA is 1/4-36. How about tapping for that and screw in a barrel mount?