Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old July 25th 06, 07:35 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 303
Default Open-Sleeve Antenna

I came across this in the ARRL Antenna Book (p. 7-21) 20th Edition.

For such a simple set-up, why haven't I heard of anyone using it?

I understand some commercial verticals use this design in some way.

From what I have read, the open-sleeve design has a simple lambda/4
vertical with two side vertical elements of given d diameter and
distance D from the center vertical (monopole).

Given the improvement of SWR bandwidth shown, why isn't this a more
popular approach? (or is it, and I just don't know it?)

John
AB8WH
  #3   Report Post  
Old July 25th 06, 11:19 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 137
Default Open-Sleeve Antenna

The open sleeve that AB8WH is referencing is several very closely
spaced elements of various lengths around a central element that is
directly driven by the feedline.

The other elements are very tightly coupled to the driven one because
they're so close, and so it's a good construction for broadening SWR
bandwidth (several overlapping resonances, elements almost the same
length) or making a multi band antenna (several widely spaced
resonances, elements widely different lengths)

- - - - - -

I think some HF multiband yagi manufacturers are using them... I don't
remember who. Also, many of the wideband long boom VHF yagi designs
have a director that ends up very closely spaced to the driven element,
essentially an open sleeve...

As to why you don't see more of them? I dunno, there are lots of ways
to make a multiband antenna. You could do the same thing out of tubing
but do it fan-dipole style and connect them all together. You could
use traps and cut out the amount of tubing you need. As far as
broadbanding, you typically only need it on the lower bands (80/75m
comes to mind) and there you'd be talking the erection of two ~70 foot
elements instead of one just to broaden your SWR curve even though
running a 3:1 SWR on your line and using the tuner in the rig would add
negligble loss. Better to take the other 70 feet of aluminum and space
it a half wavelength away from the first and phase them into a
broadside/endfire array.

I think the dimensions are a bit critical like a parallel multiband
dipole can be... lots of interaction between the elements. I don't
think they've got much of a marketing advantage right now, either.
Otherwise "open sleeve" would be an oft-heard buzzword in antenna ads
something like "linear loaded" or "no lossy traps".

Certainly an antenna construction worth knowing about, though... I
thought about building one when I first saw it too. Also, I was
playing with the possibility of adding a 2m yagi to my 6m moxon
rectangle the driven element of which would be open sleeve coupled.
Haven't had much success getting good front to back on 2m in the model
though, so I haven't pursued it. That's not the fault of the open
sleeveness... I think I need to start with a known good yagi design
first.

73,
Dan

  #4   Report Post  
Old July 26th 06, 12:37 AM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 6
Default Open-Sleeve Antenna

jawod wrote:
I came across this in the ARRL Antenna Book (p. 7-21) 20th Edition.

For such a simple set-up, why haven't I heard of anyone using it?

I understand some commercial verticals use this design in some way.

From what I have read, the open-sleeve design has a simple lambda/4
vertical with two side vertical elements of given d diameter and
distance D from the center vertical (monopole).

Given the improvement of SWR bandwidth shown, why isn't this a more
popular approach? (or is it, and I just don't know it?)

John
AB8WH


Look in ARRL Antenna Compendium Vol 5. It has a all band 40 to 10 meter
parallel fed vertical, while not a open sleeve it can achieve the same
objective all bands with no traps. This project is ground mounted. I
just wonder what would happen to this all band wonder if raised off the
ground? Maybe thats why we see all the Commercial antennas like Hygain
and MFJ use all sorts of funny contraptions and transformers on the end
of their versions of these antennas.

The Hygain Hytower is a similar concept, however not open sleeve.

Pat
  #5   Report Post  
Old July 26th 06, 01:20 AM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 137
Default Open-Sleeve Antenna

The commercial manufacturers use all kinds of contraptions to make
their antennas look like something you have to buy instead of build.

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Outside Antenna Rikk Shortwave 25 March 6th 06 07:53 PM
I Want Another Antenna Lenny Shortwave 4 January 23rd 06 11:12 PM
The Long and Thin Vertical Loop Antenna. [ The Non-Resonance Vertical with a Difference ] RHF Shortwave 0 December 27th 05 07:03 PM
Imax ground plane question Vinnie S. CB 151 April 15th 05 05:21 AM
Poor quality low + High TV channels? How much dB in Preamp? lbbs Shortwave 16 December 13th 03 04:01 PM


All times are GMT +1. The time now is 10:11 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017