Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old August 23rd 04, 05:53 PM
gobo
 
Posts: n/a
Default regency rh-250 to 2 meters

has anyone modified the regency rh-250 to 2 meter use?
the manual says that a minimum of 7 volts is needed out of the vco.
i'm only able to get out 4. i'm sure L201 needs to be changed, but
regency did not publish the value of this coil and relm no longer
has any engineering info. anyone changed this coil to get out the
required 7 volts from the vco?

thanks.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
WTB: Meters for T-195 militry transmitter Norm - WA3KEY Boatanchors 0 July 2nd 04 01:10 AM
siro827 5/8 wave cb ant tuned to 10 meters working on 20 meters DAVID BROWNE Antenna 0 June 26th 04 09:14 PM
siro827 5/8 wave cb ant tuned to 10 meters working on 20 meters DAVID BROWNE Antenna 0 June 26th 04 09:14 PM
stub for 20 meters Iol Antenna 0 November 20th 03 04:42 PM
FS: Gonset Communicator III - 2 Meters Dave Hollander Boatanchors 0 September 3rd 03 03:56 AM


All times are GMT +1. The time now is 11:23 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017