Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old December 12th 03, 01:55 AM
WJW
 
Posts: n/a
Default Audiovox MDU-6000

I recently acquired an Audiovox MDU-6000 CB with the mic-mounted controls.
The transceiver mounts under the dash. On the transceiver, there is the
standard red & black (power/ground) connection wires...but there also is a
full harness set of wires coming from another outlet. What is the purpose
of this harness...is it for wiring into the vehicle's am/fm radio system?
If I do not use this harness, do I then need to attach an external speaker
(it has a speaker plug)? Excuse my ignorance but I've never used one of
these radios before and it did not come with a manual. Thanks and Happy
Holidays!

WJ


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Sirius audiovox antenna for house - house antenna or car? Which & where to point? Terry Parker Broadcasting 0 July 20th 04 10:12 PM
Ameritron Linear ALS 6000 Steve Mercure Equipment 0 June 27th 04 11:58 PM
Ameritron Linear ALS 6000 Steve Mercure Equipment 0 June 27th 04 11:58 PM
WTB: 6000 Tube (2) or source? K3HVG Boatanchors 1 June 22nd 04 02:20 PM
cobra 6000 Dave VanHorn CB 1 September 2nd 03 05:08 PM


All times are GMT +1. The time now is 04:19 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017