Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old December 30th 03, 09:20 AM
Mohd Nazry Bin Mustapa
 
Posts: n/a
Default Yaesu FT-8900R Tx/Fx Modification

Anybody can help me on this type of modification cause I already reffer to
one of web site for modification and the site really show how to do it. but
unfortunately when I open my rig, the position of resistor not same as the
picture showed.

The site say there is two resistor next to the cpu, and I need to remove the
most front resistor (only one)[CPU pin No. 62]

But when I open up my rig it happen that only one resistor which sit on CPU
Pin No. 60. Do this set already open the tx frequency ie; 134 - 170Mhz.

Any idea if I removed this resistor, what will happen? This resistor got no
value written (SMD), If I remove and damage this tiny resistor I might not
able to get the substitued for it. That is why I'm a little worry for this
modification.

Any kind help much appreciated

Thank you


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Yaesu FT-8900R Tx/Fx Modification Mohd Nazry Bin Mustapa Equipment 4 April 3rd 11 06:13 PM
Fox Tango International, Yaesu Users Groups w4clm Antenna 1 December 24th 04 12:48 PM
Yaesu FT 8900R Mohd Nazry Bin Mustapa Equipment 0 December 1st 03 04:10 AM
Yaesu FT 8900R Mohd Nazry Bin Mustapa Equipment 0 December 1st 03 04:10 AM
FS: Yaesu FT-51 with LCD skr/mic and 35w amp Shadow of James Equipment 0 October 15th 03 03:41 AM


All times are GMT +1. The time now is 11:08 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017