Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old August 4th 03, 12:25 AM
Jim Dolson
 
Posts: n/a
Default Mobile Icom 706MKIIg shielding problem ?

Last year I operated my Icom 706MKIIg HF mobile with no problems.
I've taken the HF antenna off and installed a 2m antenna.

With the front panel attached to the main body of the transceiver,
everything works FB.

However, when I remove the front panel and put it between the two
front seats, keying up on 2m causes what sounds like feedback - a high
pitched squeal coming out of the speaker. Talk into the mic and I can
hear myself on the radio speaker quite nicely.

Does it sound like a shielding problem with the separation cable
between the radio and the front panel? I'd be surprised simply
because I can't find any reports of this problem on the net.

Suggestions?

Thanks,

Jim

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
WTB IC-MB5 Icom Mobile Mounting Bracket George Windsor Boatanchors 0 October 5th 03 05:38 PM
WTB IC-MB5 Icom Mobile Mounting Bracket George Windsor Boatanchors 0 October 5th 03 05:38 PM
Weird Mobile Problem Michael J. Donohue VE3YF Antenna 4 August 14th 03 02:15 AM
Mobile Icom 706MKIIg shielding problem ? Jim Dolson Equipment 6 August 4th 03 12:00 PM
ICOM 706MKIIG Question Ed Cregger Equipment 0 August 3rd 03 07:11 PM


All times are GMT +1. The time now is 01:04 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017