Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old May 8th 05, 12:14 AM
 
Posts: n/a
Default What tool to measure SWR at 910 Mhz?

What tool would one use to measure the SWR at 900Mhz?

I've never seen swr bridges that went that high.

A specific model number and source would be helpful...


Paul (Kl7JG)



  #3   Report Post  
Old May 8th 05, 01:42 AM
John Smith
 
Posts: n/a
Default

Paul:

How far away is the electronics lab from the rocket lab--on campus?

Those guys might be friendly there... grin

Warmest regards,
John

"Bob Miller" wrote in message
...
| On Sat, 07 May 2005 16:14:15 -0700, wrote:
|
| What tool would one use to measure the SWR at 900Mhz?
|
| I've never seen swr bridges that went that high.
|
| A specific model number and source would be helpful...
|
|
| Paul (Kl7JG)
|
|
|
| The manual for my Bird 43 watt meter says it is rated for service up
| to 2300 Mhz. I've used it up to the 440 Mhz range with no problem.
|
| One Bird source is
http://www.rfparts.com/
|
| Another, with both new and used Birds is http://www.radiodan.com/
|
| bob
| k5qwg
|
|
|


  #4   Report Post  
Old May 8th 05, 02:54 PM
Wes Stewart
 
Posts: n/a
Default

On Sun, 08 May 2005 00:19:04 GMT, Bob Miller
wrote:

On Sat, 07 May 2005 16:14:15 -0700, wrote:

What tool would one use to measure the SWR at 900Mhz?

I've never seen swr bridges that went that high.

A specific model number and source would be helpful...


Paul (Kl7JG)



The manual for my Bird 43 watt meter says it is rated for service up
to 2300 Mhz. I've used it up to the 440 Mhz range with no problem.

One Bird source is
http://www.rfparts.com/

Another, with both new and used Birds is http://www.radiodan.com/


The problem with the Bird is that it requires considerable power to
run it. With 1 watt available, you're (the OP) kind of out of luck.

The OP has access to a spectrum analyzer/tracking generator. I
suggest a directional coupler with the main arm driven by the
generator, the coupled arm as the input to the SA and the thru port to
the DUT. Calibrate the SA with a short on the output of the coupler
(100% reflection) and measure return loss directly in dB on the
screen.

A similar idea using diode detection is he

http://www.qsl.net/n9zia/24swr/


  #5   Report Post  
Old May 8th 05, 02:57 PM
Scott
 
Posts: n/a
Default

A Wattmeter is probably the easiest to use at 910. Slugs for the
standard Bird Wattmeter can be bought to cover that range. At work, I
use a Telewave Wattmeter. It goes from 20 to 1000 MHz with no slugs.
The model 44A is probably the best bang for the buck (in my opinion).

http://www.telewave.com/pricelist/wattmeter.html

For the Bird (4410A Wattmeter):
http://www.bird-electronic.com/produ...ct.aspx?id=333

Scott
N0EDV

wrote:

What tool would one use to measure the SWR at 900Mhz?

I've never seen swr bridges that went that high.

A specific model number and source would be helpful...


Paul (Kl7JG)





  #6   Report Post  
Old May 8th 05, 04:18 PM
Bob Miller
 
Posts: n/a
Default

On Sun, 08 May 2005 06:54:50 -0700, Wes Stewart
wrote:

On Sun, 08 May 2005 00:19:04 GMT, Bob Miller
wrote:

On Sat, 07 May 2005 16:14:15 -0700, wrote:

What tool would one use to measure the SWR at 900Mhz?

I've never seen swr bridges that went that high.

A specific model number and source would be helpful...


Paul (Kl7JG)



The manual for my Bird 43 watt meter says it is rated for service up
to 2300 Mhz. I've used it up to the 440 Mhz range with no problem.

One Bird source is
http://www.rfparts.com/

Another, with both new and used Birds is http://www.radiodan.com/


The problem with the Bird is that it requires considerable power to
run it. With 1 watt available, you're (the OP) kind of out of luck.


Bird does have a 1-watt measuring element, part 800-1, for 800-950 Mhz
-- there's also a 2.5 watts element, the 800-2.

Still, this is all may a bit pricey, about $4-500 for the meter and
one element -- maybe he can borrow?

bob
k5qwg



The OP has access to a spectrum analyzer/tracking generator. I
suggest a directional coupler with the main arm driven by the
generator, the coupled arm as the input to the SA and the thru port to
the DUT. Calibrate the SA with a short on the output of the coupler
(100% reflection) and measure return loss directly in dB on the
screen.

A similar idea using diode detection is he

http://www.qsl.net/n9zia/24swr/


  #7   Report Post  
Old May 8th 05, 04:27 PM
John Smith
 
Posts: n/a
Default

A "cheap fix" would be a FWD-REF takeoff bridge--SD's colleges' electronic
lab/engineering surely must have a SHF oscilliscope--or the students able to
slap together a decade freq divider to put before a slower scope...

John
--
When Viagra fails to work--you are DOOMED!!!

"Bob Miller" wrote in message
...
| On Sun, 08 May 2005 06:54:50 -0700, Wes Stewart
| wrote:
|
| On Sun, 08 May 2005 00:19:04 GMT, Bob Miller
| wrote:
|
| On Sat, 07 May 2005 16:14:15 -0700, wrote:
|
| What tool would one use to measure the SWR at 900Mhz?
|
| I've never seen swr bridges that went that high.
|
| A specific model number and source would be helpful...
|
|
| Paul (Kl7JG)
|
|
|
| The manual for my Bird 43 watt meter says it is rated for service up
| to 2300 Mhz. I've used it up to the 440 Mhz range with no problem.
|
| One Bird source is
http://www.rfparts.com/
|
| Another, with both new and used Birds is http://www.radiodan.com/
|
| The problem with the Bird is that it requires considerable power to
| run it. With 1 watt available, you're (the OP) kind of out of luck.
|
| Bird does have a 1-watt measuring element, part 800-1, for 800-950 Mhz
| -- there's also a 2.5 watts element, the 800-2.
|
| Still, this is all may a bit pricey, about $4-500 for the meter and
| one element -- maybe he can borrow?
|
| bob
| k5qwg
|
|
|
| The OP has access to a spectrum analyzer/tracking generator. I
| suggest a directional coupler with the main arm driven by the
| generator, the coupled arm as the input to the SA and the thru port to
| the DUT. Calibrate the SA with a short on the output of the coupler
| (100% reflection) and measure return loss directly in dB on the
| screen.
|
| A similar idea using diode detection is he
|
| http://www.qsl.net/n9zia/24swr/
|
|


  #8   Report Post  
Old May 8th 05, 04:50 PM
Wes Stewart
 
Posts: n/a
Default

On Sun, 08 May 2005 15:18:06 GMT, Bob Miller
wrote:

Bird does have a 1-watt measuring element, part 800-1, for 800-950 Mhz
-- there's also a 2.5 watts element, the 800-2.


I stand corrected. I just checked the RF Parts link and didn't see
any.

  #9   Report Post  
Old May 8th 05, 05:38 PM
 
Posts: n/a
Default

Thanks for all of the replies.
I just ordered a used Bird 43 and an 801-1 1W 800-1000Mhz element.
from radiodan.

Paul (KL7JG)




  #10   Report Post  
Old May 8th 05, 05:41 PM
Jim - NN7K
 
Posts: n/a
Default

Also, any of the Bird lookalikes (Struthers, Dielectric, STB,
General Signal, ect. ) These are almost duplicates of the Bird 43
even use the same slugs, and their slugs will work in Bird meters)
Also, Struthers, ect. made meters that have 4 power range slugs
(good to 500 watts, and 1000 MHz) Telwave (no slugs required, has
4 range power switch, looks otherwise a lot like the #43) is good
to 1000 MHz. Can find them on E-BAY, under
"Watt Meters". As info, Jim NN7K


Bob Miller wrote:
On Sat, 07 May 2005 16:14:15 -0700, wrote:


What tool would one use to measure the SWR at 900Mhz?

I've never seen swr bridges that went that high.

A specific model number and source would be helpful...


Paul (Kl7JG)




The manual for my Bird 43 watt meter says it is rated for service up
to 2300 Mhz. I've used it up to the 440 Mhz range with no problem.

One Bird source is
http://www.rfparts.com/

Another, with both new and used Birds is http://www.radiodan.com/

bob
k5qwg



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Can you measure and post your DTMF Twist? Rick General 0 April 4th 05 06:57 AM
"Cold Heat" Soldering Tool RHF Shortwave 14 January 9th 05 01:32 AM
Excel - ADIF Converstion Tool J. D. Beischel Dx 0 September 26th 03 03:38 AM
Excel Tool - Create ADIF file from Manual J. D. Beischel General 0 September 26th 03 03:37 AM
Excel Tool - Create ADIF file from Manual J. D. Beischel General 0 September 26th 03 03:37 AM


All times are GMT +1. The time now is 11:20 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017