Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old July 26th 03, 02:38 AM
'Doc
 
Posts: n/a
Default How do I make a cheap but good pirate radio antenna



"Dominick(dblacklab)" wrote:

Can anyone help me "homebrew" a goos FM Pirate radio antenna?
Help! Please!



Step One:
Find an unused pirate (preferably FM).

Step Two:
Make feedline connections to pirate.

Step Three:
Feed signal to pirate.
  #2   Report Post  
Old July 26th 03, 11:58 AM
David Robbins
 
Posts: n/a
Default

sure, take a resistor rated to dissipate as much power as your transmitter,
encase in metal can, add connector, and away you go.

"Dominick(dblacklab)" wrote in message
...
Can anyone help me "homebrew" a goos FM Pirate radio antenna?
Help! Please!




  #3   Report Post  
Old July 26th 03, 12:05 PM
David Robbins
 
Posts: n/a
Default

p.s. this one has the added advatage of makeing it a legal pirate station.

"David Robbins" wrote in message
...
sure, take a resistor rated to dissipate as much power as your

transmitter,
encase in metal can, add connector, and away you go.

"Dominick(dblacklab)" wrote in message
...
Can anyone help me "homebrew" a goos FM Pirate radio antenna?
Help! Please!






  #4   Report Post  
Old July 26th 03, 12:58 PM
 
Posts: n/a
Default



"Dominick(dblacklab)" wrote:

Can anyone help me "homebrew" a goos FM Pirate radio antenna?
Help! Please!


This guy asks a logical question and you people have to pull his chain.

Wake the heck up.

Dom, all I use is a 14 gage wire as high in the trees and conected to my
radio.

Works good.
  #5   Report Post  
Old July 26th 03, 01:41 PM
Dennis Kaylor
 
Posts: n/a
Default

wake the hell up??
they are awake and doing exactly as they should it would be illegal to
build and use a pirate radio station and if anyone helped him it would
be aiding and a betting and could cause a licensed ham to lose the
licenese he worked so hard for
if this guy cant figure out how to build a simple antenna he will never
get the transmitter working he should stick with internet broadcasting



  #6   Report Post  
Old July 26th 03, 11:23 PM
Dr. Slick
 
Posts: n/a
Default

"Dominick(dblacklab)" wrote in message ...
Can anyone help me "homebrew" a goos FM Pirate radio antenna?
Help! Please!



You can make a 1/4 wave vertical antenna very easily. If you only need
it to work for a short while, then you can use cheesy materials as
follows:

Get a UHF panel mount receptacle, SO-239. Find some brass rod that will
fit into the solder lug on the connector. you will need about a 30"
length of this for the element. The formula is length(inches) =
2800/freq(MHz). Solder the rod into the connector's center pin.

Drill the necessary five holes to mount the connector in a brass sheet
that's available at hobby stores. Use .031" or .062" thick brass. Then
solder four 36" lengths of brass rod to the plate, fanning out
horizontally in four directions, to make ground radials for the antenna.
Bend each radial downward about 45 degrees.

You can mount the antenna by bolting some angle iron to the brass plate,
and drilling holes for a mast clamp in the vertical part of the angle
iron.

This antenna will be about 50 ohms.



Take a look at http://home.tbbs.net/~bhammond/FM_ANT/ to see how it's done.

The next type you could consider is the "j-pole". Again, this has an
unbalanced 50 ohm match (if constructed correctly), and is quite easy to
attach to a mast. http://www.hamuniverse.com/jpole.html is a handy
calculator for getting the length right.

A quick Google search for antenna types would definately help you out!



Slick (pasting from other posts)
  #7   Report Post  
Old July 26th 03, 11:42 PM
 
Posts: n/a
Default

Be sure to wrap a flag (Skull and Crossbones) around the terminateing
resistor!!



"Dennis Kaylor" wrote in message
...
wake the hell up??
they are awake and doing exactly as they should it would be illegal to
build and use a pirate radio station and if anyone helped him it would
be aiding and a betting and could cause a licensed ham to lose the
licenese he worked so hard for
if this guy cant figure out how to build a simple antenna he will never
get the transmitter working he should stick with internet broadcasting




  #8   Report Post  
Old July 27th 03, 04:29 AM
kb8yio
 
Posts: n/a
Default

yeah get two pieces of tubing......... 468 divided by the freq in use...
cut in half.... separate at least 2 inchs attach coax cable ...

"Dominick(dblacklab)" wrote in message
...
Can anyone help me "homebrew" a goos FM Pirate radio antenna?
Help! Please!




  #9   Report Post  
Old July 27th 03, 06:45 AM
Dave Platt
 
Posts: n/a
Default

In article , 'Doc wrote:

Can anyone help me "homebrew" a goos FM Pirate radio antenna?
Help! Please!



Step One:
Find an unused pirate (preferably FM).

Step Two:
Make feedline connections to pirate.


Direct connection to coax. Do not use ladder line. Do not use a balun.

History indicates quite strongly that most pirates were unbalanced.


--
Dave Platt AE6EO
Hosting the Jade Warrior home page: http://www.radagast.org/jade-warrior
I do _not_ wish to receive unsolicited commercial email, and I will
boycott any company which has the gall to send me such ads!
  #10   Report Post  
Old July 27th 03, 08:51 AM
'Doc
 
Posts: n/a
Default



Dave,
How about an 'UnUn', then?
'Doc
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
50 Ohms "Real Resistive" impedance a Misnomer? Dr. Slick Antenna 255 July 29th 03 11:24 PM
Looking for info on a good triband antenna Elmer E Ing Antenna 3 July 27th 03 04:27 PM


All times are GMT +1. The time now is 10:14 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017