Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Interchanging Kenwood TM741 and TM742 Control Heads??
Does anyone know if the control heads from the Kenwood TM741 and TM742
are completely interchangeable? I have a TM741 radio and control head and another TM742 control head. Since the 742 head "comes apart" into 2 separate units with the proper interconnecting cable, it would make a new moble installation much easier. Thanks for reading this post. Ed K2ZE |
#2
|
|||
|
|||
No.
-- Clif Holland, KA5IPF AVVid Authorized Kenwood and Icom Service Center 816 W Shady Grove Rd Irving, TX 75060 www.avvid.com 1-800-214-5779 972-870-0630 (Local) "Hobbes" wrote in message ... Does anyone know if the control heads from the Kenwood TM741 and TM742 are completely interchangeable? I have a TM741 radio and control head and another TM742 control head. Since the 742 head "comes apart" into 2 separate units with the proper interconnecting cable, it would make a new moble installation much easier. Thanks for reading this post. Ed K2ZE |
#3
|
|||
|
|||
No.
-- Clif Holland, KA5IPF AVVid Authorized Kenwood and Icom Service Center 816 W Shady Grove Rd Irving, TX 75060 www.avvid.com 1-800-214-5779 972-870-0630 (Local) "Hobbes" wrote in message ... Does anyone know if the control heads from the Kenwood TM741 and TM742 are completely interchangeable? I have a TM741 radio and control head and another TM742 control head. Since the 742 head "comes apart" into 2 separate units with the proper interconnecting cable, it would make a new moble installation much easier. Thanks for reading this post. Ed K2ZE |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|