Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old November 14th 04, 04:50 AM
StevenS
 
Posts: n/a
Default What is the best HF transceiver these days?

Hello,

I've been out of the hobby for years now, but want to purchase an HF
rig, possibly with the 6m and 2m and even 70cm options. My main
concern is that the radio have the best and most flexible receiver
possible. I'd like to do some DSP work and if the receiver is a
software receiver and is programmable, that would be very desirable.

I was looking at the TenTec site and they advertise a transceiver with
0.35 uV sensitivity at 10db S+N/N in a 3KHz SSB mode. On the other
hand, the Kenwood 480 guys are claiming a 0.10 uV sensitivity, but
didn't say what mode.

It looks to me like TenTec is the most technologically advanced, but
then why the lower sensitivity? I wonder if Kenwood is not completely
truthful.

Well anyway, what's going on? Are these the right brands to be
looking at anyway?

Thank you,

StevenS
  #2   Report Post  
Old November 14th 04, 01:45 PM
QrZdoTKoM
 
Posts: n/a
Default

StevenS wrote:
Hello,

I've been out of the hobby for years now, but want to purchase an HF
rig, possibly with the 6m and 2m and even 70cm options. My main
concern is that the radio have the best and most flexible receiver
possible. I'd like to do some DSP work and if the receiver is a
software receiver and is programmable, that would be very desirable.

I was looking at the TenTec site and they advertise a transceiver with
0.35 uV sensitivity at 10db S+N/N in a 3KHz SSB mode. On the other
hand, the Kenwood 480 guys are claiming a 0.10 uV sensitivity, but
didn't say what mode.

It looks to me like TenTec is the most technologically advanced, but
then why the lower sensitivity? I wonder if Kenwood is not completely
truthful.

Well anyway, what's going on? Are these the right brands to be
looking at anyway?

Thank you,

StevenS


BPL will be ending Ham Radio soon.

Save your $$$$.

  #3   Report Post  
Old November 14th 04, 02:07 PM
Dee D. Flint
 
Posts: n/a
Default


"StevenS" wrote in message
om...
Hello,

I've been out of the hobby for years now, but want to purchase an HF
rig, possibly with the 6m and 2m and even 70cm options. My main
concern is that the radio have the best and most flexible receiver
possible. I'd like to do some DSP work and if the receiver is a
software receiver and is programmable, that would be very desirable.

I was looking at the TenTec site and they advertise a transceiver with
0.35 uV sensitivity at 10db S+N/N in a 3KHz SSB mode. On the other
hand, the Kenwood 480 guys are claiming a 0.10 uV sensitivity, but
didn't say what mode.

It looks to me like TenTec is the most technologically advanced, but
then why the lower sensitivity? I wonder if Kenwood is not completely
truthful.

Well anyway, what's going on? Are these the right brands to be
looking at anyway?

Thank you,

StevenS


I think you can't go wrong with any of the major makers such as TenTec,
Yaesu, Icom, and Kenwood. They are all good. In either case, the
sensitivity is excellent and you as the operator probably won't notice the
difference. Your antenna setup will make the major difference.

Instead, decide what features you want and how important each feature is to
you. Then see how the various radios stack up. For example both my
husband's Icom 741 and my Kenwood TS-2000 have built in keyers on which you
can set the speed. However on his there is no readout as to what the speed
is. You have to just set it by ear to the approximate speed that you want
but within its range it is infinitely variable (i.e. not limited to whole
number increments). On mine, I get a readout of the setting and can set it
at a specific speed. but it is limited to whole number increments. So what
do you prefer? His radio allows the add-on filters internally as well as
having DSP. Mine does not. Again what is important to you?

Dee D. Flint, N8UZE

  #4   Report Post  
Old November 14th 04, 03:38 PM
Mad Dog
 
Posts: n/a
Default

I would not concern thyself with BPL too much.....
they have got enough problems of their own.
--
KG4LBD

"QrZdoTKoM" QrZdoTKoM@QrZdoTKoM wrote in message
...
StevenS wrote:
Hello,

I've been out of the hobby for years now, but want to purchase an HF
rig, possibly with the 6m and 2m and even 70cm options. My main
concern is that the radio have the best and most flexible receiver
possible. I'd like to do some DSP work and if the receiver is a
software receiver and is programmable, that would be very desirable.

I was looking at the TenTec site and they advertise a transceiver with
0.35 uV sensitivity at 10db S+N/N in a 3KHz SSB mode. On the other
hand, the Kenwood 480 guys are claiming a 0.10 uV sensitivity, but
didn't say what mode.

It looks to me like TenTec is the most technologically advanced, but
then why the lower sensitivity? I wonder if Kenwood is not completely
truthful.

Well anyway, what's going on? Are these the right brands to be
looking at anyway?

Thank you,

StevenS


BPL will be ending Ham Radio soon.

Save your $$$$.



  #5   Report Post  
Old November 14th 04, 03:42 PM
Chris Howard
 
Posts: n/a
Default

On 13 Nov 2004 19:50:20 -0800, StevenS wrote:
Hello,

I've been out of the hobby for years now, but want to purchase an HF
rig, possibly with the 6m and 2m and even 70cm options. My main
concern is that the radio have the best and most flexible receiver
possible. I'd like to do some DSP work and if the receiver is a
software receiver and is programmable, that would be very desirable.


Are you looking at the software defined radio angle?
There are a couple of those now being manufactured that
might be better platforms for doing DSP work.




  #6   Report Post  
Old November 14th 04, 03:59 PM
QrZdoTKoM
 
Posts: n/a
Default

Mad Dog wrote:
I would not concern thyself with BPL too much.....
they have got enough problems of their own.
--
KG4LBD


Go back to CB where you belong....



"QrZdoTKoM" QrZdoTKoM@QrZdoTKoM wrote in message
...

StevenS wrote:

Hello,

I've been out of the hobby for years now, but want to purchase an HF
rig, possibly with the 6m and 2m and even 70cm options. My main
concern is that the radio have the best and most flexible receiver
possible. I'd like to do some DSP work and if the receiver is a
software receiver and is programmable, that would be very desirable.

I was looking at the TenTec site and they advertise a transceiver with
0.35 uV sensitivity at 10db S+N/N in a 3KHz SSB mode. On the other
hand, the Kenwood 480 guys are claiming a 0.10 uV sensitivity, but
didn't say what mode.

It looks to me like TenTec is the most technologically advanced, but
then why the lower sensitivity? I wonder if Kenwood is not completely
truthful.

Well anyway, what's going on? Are these the right brands to be
looking at anyway?

Thank you,

StevenS


BPL will be ending Ham Radio soon.

Save your $$$$.




  #7   Report Post  
Old November 14th 04, 04:06 PM
J999w
 
Posts: n/a
Default


BPL will be ending Ham Radio soon.

Save your $$$$.


Ya .... right.

Check out www.eham.com ... look at the equipment reviews section.

jw
k9rzz
  #8   Report Post  
Old November 14th 04, 04:13 PM
QrZdoTKoM
 
Posts: n/a
Default

J999w wrote:
BPL will be ending Ham Radio soon.

Save your $$$$.



Ya .... right.

Check out www.eham.com ... look at the equipment reviews section.

jw
k9rzz


Your CB Good Buddies are looking for ya... 10-4?

  #9   Report Post  
Old November 14th 04, 04:57 PM
Airy R. Bean
 
Posts: n/a
Default

Firstly, Ham Radio is not a hobby, it's a technical pursuit.

The best transceiver for any self-respecting _REAL_ Radio Ham is
the one that he conceives and makes for himself.

CBers, OTOH, have a hobby and buy their rigs off the shelf, even
sending them back to the emporium if needing repair.

You'd be surprised at how many CBers-Masquerading-As-Radio-Hams
there are to be found today!

StevenS wrote:
I've been out of the hobby for years now, but want to purchase an HF
rig, possibly with the 6m and 2m and even 70cm options. My main
concern is that the radio have the best and most flexible receiver
possible. I'd like to do some DSP work and if the receiver is a
software receiver and is programmable, that would be very desirable.



  #10   Report Post  
Old November 14th 04, 05:06 PM
Keyboard In The Wilderness
 
Posts: n/a
Default

Looking at sensitivity without examining the other receiver characteristics
won't tell you much.
You should take into account all of these:
Sensitivity
Dynamic range
Selectivity -- Filter Characteristics such as Shape factor (skirt
selectivity) and ripple
Intermodulation Distortion
Phase Noise - Noise floor
Minimum Discernable Signal
DSP performance
More

See Selecting a rig at URL:
http://www.arrl.org/tis/info/pdf/29379.pdf

Then read the reviews

The ARRL transceiver reviews is a good place to compare these specs and what
they mean.
http://www.arrl.org/members-only/prodrev/

A rig can have super sensitivity specs with lousy dynamic range -- it is
difficult to get both -- lots of tradeoffs in receiver design.
Dynamic range is a very important receiver spec as is selectivity as well as
sensitivity.

Look for high receiver intercept points, excellent dynamic range, sharp
selectivity and a low phase-noise synthesizer

Be careful when comparing a $1000 radio to a $3300 radio -- there are
usually good reasons for the higher price.

The Anon Keyboard
I doubt, therefore I might be



"StevenS" wrote in message
om...
Hello,

I've been out of the hobby for years now, but want to purchase an HF
rig, possibly with the 6m and 2m and even 70cm options. My main
concern is that the radio have the best and most flexible receiver
possible. I'd like to do some DSP work and if the receiver is a
software receiver and is programmable, that would be very desirable.

I was looking at the TenTec site and they advertise a transceiver with
0.35 uV sensitivity at 10db S+N/N in a 3KHz SSB mode. On the other
hand, the Kenwood 480 guys are claiming a 0.10 uV sensitivity, but
didn't say what mode.

It looks to me like TenTec is the most technologically advanced, but
then why the lower sensitivity? I wonder if Kenwood is not completely
truthful.

Well anyway, what's going on? Are these the right brands to be
looking at anyway?

Thank you,

StevenS



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: Yaesu FT-8500 VHF/UHF Dual Band FM Transceiver David Black Equipment 3 November 1st 04 05:31 AM
FS: Yaesu FT-8500 VHF/UHF Dual Band FM Transceiver David Black Equipment 0 November 1st 04 05:26 AM
FA: ALINCO DX-70TH 100W HF & 6M Transceiver - 3 days left Josh Goldsmith Equipment 0 March 12th 04 04:53 PM
FA: ALINCO DX-70TH 100W HF & 6M Transceiver - 3 days left Josh Goldsmith Equipment 0 March 12th 04 04:53 PM
FS: Drake TR270 Transceiver David Black Equipment 0 July 21st 03 10:09 PM


All times are GMT +1. The time now is 07:44 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017