Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old October 24th 04, 12:38 AM
Michael St. Angelo
 
Posts: n/a
Default Radware DSP100 "software" Transceiver

I fired up my old 486 PC and tested a Radware DSP100 transceiver.

The DSP100 was an early attempt at a transceiver with a digital IF and
modulation/demodulation
stages. It was a direct conversion transceiver.,built on a plugin ISA board,
with a PLL/DDS synthesizer that
drove a Quadrature Mixer. Te two outputs of the quadrature mixer fed the
left and right channels of the computer sound card
which did the filtering and demodulation/modulation.

It was produced by Comer Communications in the 1980's. The hardware and
software was developed by two brothers, Alan and Brian Comer.

The sensitivity was fair and the software I have has some bugs, but it was a
gallant attempt at the first
generation of "software defined receiver".

Does anyone have one or know what happened to Comer communications or have
any experiences with the DSP100?
I have software versions 1.19 through 1.22. Does anyone have any later
versions?


73,

Mike N2MS


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: Yaesu FT-8500 VHF/UHF Dual Band FM Transceiver David Black Equipment 0 November 1st 04 05:26 AM
Radware DSP100 "software" Transceiver Michael St. Angelo Equipment 0 October 24th 04 12:38 AM
Radware DSP100 "software" Transceiver Michael St. Angelo Equipment 0 October 24th 04 12:38 AM
Radware DSP100 "software" Transceiver Michael St. Angelo Equipment 0 October 24th 04 12:38 AM


All times are GMT +1. The time now is 08:40 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017