Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old January 11th 04, 07:45 AM
Ira J. Moser
 
Posts: n/a
Default FS: Rubidium, Quartz Frequency Standards


AT&T LUCENT RFG-RB, and RFG-XO Rubidium, and Ovenized Quartz frequency standards.

The Rubidium unit outputs 10 and 15 MHz, and the Quartz unit outputs
15MHz, disciplined by the 10MHz signal from the Quartz oscillator.
Either can be
used standalone, as well. Requires 24vdc (1.3A warmup, 600mA operating
for the
-RB, 400mA warmup/operating for the -XO) Approximate warmup
(phase-lock) time is
6 minutes for each unit.

http://www.meco.org/userGraphics/RbOsc_Composite.JPG

http://www.meco.org/userGraphics/QuartzOsc.JPG

$550 for the -RB

$80 for the -XO

Either is suitable for use on a bench, or for integration into a rack.


Amex/MC/Visa/Certified Funds, freight additional.

Later,

--Ira

--
Ira J. Moser, Owner, MECO
Tel: (425) 788-0208
Fax: (360) 794-8754
Email:
Web:
www.meco.org
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FCC: Broadband Power Line Systems Paul Policy 0 January 10th 05 06:41 PM
MilAir Monitoring from KeyWest - Lots of Comms! GeorgeF Scanner 1 May 13th 04 09:37 PM
North-Central Florida Mil Logs 9/10/2003 & 9/11/2003 GeorgeF Scanner 1 September 13th 03 04:10 AM
North-Central Florida Mil Logs 9/10/2003 & 9/11/2003 GeorgeF Shortwave 0 September 12th 03 03:32 AM
North-Central Florida Mil Logs 9/3/2003 GeorgeF Scanner 0 September 4th 03 01:15 AM


All times are GMT +1. The time now is 10:58 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017