Home |
Search |
Today's Posts |
#1
|
|||
|
|||
PC Control program for Yaesu FRG-9600 (FRG-965) & Kenwood TS-940S
Hi There,
Many thanks for reading this request. Can anyone recommend a CAT program for principally the Yaesu FRG-9600 scanner (if it included CAT control of my TS-940S, it would be perfect!). I want to be able to store sets of frequencies and get the rig to scan them, etc. Obvioudsly, the cheaper the better and must run on a PC. Many Thanks and I will look forward to any suggestions. Robert (GM0CSN) |
#2
|
|||
|
|||
PC Control program for Yaesu FRG-9600 (FRG-965) & Kenwood TS-940S
"Trusty Trucker" wrote in message ... Hi There, Many thanks for reading this request. Can anyone recommend a CAT program for principally the Yaesu FRG-9600 scanner (if it included CAT control of my TS-940S, it would be perfect!). I want to be able to store sets of frequencies and get the rig to scan them, etc. Obvioudsly, the cheaper the better and must run on a PC. Many Thanks and I will look forward to any suggestions. Robert (GM0CSN) Maybe not what you are looking for, but i hope this is of use:- http://www.tiny.cc/dMWxv 73's and have a cool yule folks! |
#3
|
|||
|
|||
PC Control program for Yaesu FRG-9600 (FRG-965) & Kenwood TS-940S
"Joanne" wrote in message o.uk... "Trusty Trucker" wrote in message ... Hi There, Many thanks for reading this request. Can anyone recommend a CAT program for principally the Yaesu FRG-9600 scanner (if it included CAT control of my TS-940S, it would be perfect!). I want to be able to store sets of frequencies and get the rig to scan them, etc. Obvioudsly, the cheaper the better and must run on a PC. Many Thanks and I will look forward to any suggestions. Robert (GM0CSN) Maybe not what you are looking for, but i hope this is of use:- http://www.tiny.cc/dMWxv 73's and have a cool yule folks! Grrrrr wrong link, sorry Rob http://tinyurl.com/y5d2rk ... thats better |
#4
|
|||
|
|||
PC Control program for Yaesu FRG-9600 (FRG-965) & Kenwood TS-940S
Is your as deaf as mine is !!!!
been modded (badly) and bloody deaf... get a better receive from a tandy scanner..!! "Trusty Trucker" wrote in message ... Hi There, Many thanks for reading this request. Can anyone recommend a CAT program for principally the Yaesu FRG-9600 scanner (if it included CAT control of my TS-940S, it would be perfect!). I want to be able to store sets of frequencies and get the rig to scan them, etc. Obvioudsly, the cheaper the better and must run on a PC. Many Thanks and I will look forward to any suggestions. Robert (GM0CSN) |
#5
|
|||
|
|||
PC Control program for Yaesu FRG-9600 (FRG-965) & Kenwood TS-940S
"Walt Davidson" wrote in message
... On Fri, 22 Dec 2006 21:51:19 GMT, "Joanne" wrote: have a cool yule folks! ROTFL! I haven't heard that one since the sixties. :-) Season's Greetings de G3NYY -- Walt Davidson Email: g3nyy @despammed.com What was it they say Walt... "If you remember the 60's you weren't really there" or something like that !! 73 and Merry Christmas Ya old hippy ;o) Graham -- ...--- . ----- -.-- ... ..- Radio is only a Hobby. Don't let it rule your life... 73/51 - 2EO e0 e000h Franklin Radio Group (www.farc.co.uk) |
#6
|
|||
|
|||
PC Control program for Yaesu FRG-9600 (FRG-965) & Kenwood TS-940S
On Sat, 23 Dec 2006 15:49:06 +0000, Walt Davidson wrote:
On Sat, 23 Dec 2006 14:02:02 -0000, "Magnum 2E0" wrote: What was it they say Walt... "If you remember the 60's you weren't really there" or something like that !! Hey, I remember the 60's - or at least I think I do sometimes! 73 and Merry Christmas Ya old hippy ;o) I still have my original "flower power" bell. :-) Cordial season's greeting to you too, old chap! 73 de G3NYY de kbnd0338 (well, not all of us were CW oriented!) out! |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Help with a IC-718 PC Control program | Equipment | |||
Control signals for Kenwood remote antenna tuner? | Equipment | |||
Control signals for Kenwood remote antenna tuner? | Equipment | |||
Interchanging Kenwood TM741 and TM742 Control Heads?? | Equipment | |||
Interchanging Kenwood TM741 and TM742 Control Heads?? | Equipment |