Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old November 14th 05, 01:05 AM
DaveM
 
Posts: n/a
Default Need wire identification for Alliance Rotor motor

wrote in message
...
This is the common alliance rotor that was used forever on tv
antennas, called the Tenna Rotor. I cant find a model # on it.
Anyhow, there are 4 wire terminals, labelled 1 thru 4. I am trying to
find out what each does. From what I know, one would be ground, one
POS Left, one POS Right, the other sends the direction back to the
control. I'm trying to rig a different brand of control the motor but
need to know what is what on the motor wiring. Please post this info
if you know it.

Thanks

George


If your rotor is the Allinance U-100 model, you can download the manual from
http://bama.edebris.com/manuals/alliance/u100
It includes a schematic

--
Dave M
MasonDG44 at comcast dot net (Just substitute the appropriate characters in
the address)

Never take a laxative and a sleeping pill at the same time!!


  #2   Report Post  
Old November 14th 05, 05:40 AM
DaveM
 
Posts: n/a
Default Need wire identification for Alliance Rotor motor

wrote in message
...
On Sun, 13 Nov 2005 19:05:54 -0500, "DaveM"
wrote:

wrote in message
. ..
This is the common alliance rotor that was used forever on tv
antennas, called the Tenna Rotor. I cant find a model # on it.
Anyhow, there are 4 wire terminals, labelled 1 thru 4. I am trying to
find out what each does. From what I know, one would be ground, one
POS Left, one POS Right, the other sends the direction back to the
control. I'm trying to rig a different brand of control the motor but
need to know what is what on the motor wiring. Please post this info
if you know it.

Thanks

George


If your rotor is the Allinance U-100 model, you can download the manual
from
http://bama.edebris.com/manuals/alliance/u100
It includes a schematic



Thanks Dave.

Just when I was all excited that I could get the info and figure out
why the heck I cant get this to work, I downloaded the PDF file and
found its defective. I downloaded it twice to my harddrive, and tried
to load it into both IE and Firefox. The PDF file is defective.
That sucks !!!
Back to square one.

George


Hmmmm!!!! I downloaded the PDF and it opened perfectly for me.... I can
send a copy to you directly if you would like...

--
Dave M
MasonDG44 at comcast dot net (Just substitute the appropriate characters in
the address)

Never take a laxative and a sleeping pill at the same time!!


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Question is 'it' a Longwire {Random Wire} Antenna -or- Inverted "L" Antenna ? RHF Shortwave 5 November 6th 05 05:52 AM
Is this voltage doubler different? Mike Silva Homebrew 16 February 2nd 05 07:14 PM
Two Shortwave Listener (SWL) 10:1 Baluns for Random Wire Antennas RHF Swap 0 October 6th 04 09:51 PM
Newbie SWL question: Antenna geometry Hidalgo Shortwave 5 June 8th 04 03:47 AM
RF filters and Impedance Matching Paul Burridge Homebrew 16 April 10th 04 01:29 PM


All times are GMT +1. The time now is 09:51 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017