Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old November 14th 05, 04:14 AM
Glenn
 
Posts: n/a
Default Need wire identification for Alliance Rotor motor

I have a scan of a U-100 schematic. E-mail me and I'll send it to you.
73 de Glenn AA5PK

wrote in message ...
This is the common alliance rotor that was used forever on tv
antennas, called the Tenna Rotor. I cant find a model # on it.
Anyhow, there are 4 wire terminals, labelled 1 thru 4. I am trying to
find out what each does. From what I know, one would be ground, one
POS Left, one POS Right, the other sends the direction back to the
control. I'm trying to rig a different brand of control the motor but
need to know what is what on the motor wiring. Please post this info
if you know it.

Thanks

George



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need wire identification for Alliance Rotor motor DaveM Equipment 1 November 14th 05 05:40 AM
Question is 'it' a Longwire {Random Wire} Antenna -or- Inverted "L" Antenna ? RHF Shortwave 5 November 6th 05 05:52 AM
Is this voltage doubler different? Mike Silva Homebrew 16 February 2nd 05 07:14 PM
Two Shortwave Listener (SWL) 10:1 Baluns for Random Wire Antennas RHF Swap 0 October 6th 04 09:51 PM
RF filters and Impedance Matching Paul Burridge Homebrew 16 April 10th 04 01:29 PM


All times are GMT +1. The time now is 10:46 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017