Home |
Search |
Today's Posts |
#1
|
|||
|
|||
<
Back in the mid 70's Motorola made a console that would fit between the
driver and passenger seat. It was made of a black plastic and the main use was to mount a rig on the front causing the face of the rig to face the top of the car at a slight angle for easy viewing and the rear of the rig would fit over the seat. It also contained a place for an internal speaker and a center console area that would open for storage or could be used for writing if closed. Does anyone remember these or might know where I could find one??? I tried eBay already and have never seen them listed. Thanks Chuck W=D8CBF |
#2
|
|||
|
|||
Back in the mid 70's Motorola made a console that would fit between the driver and passenger seat. It was made of a black plastic and the main use was to mount a rig on the front causing the face of the rig to face the top of the car at a slight angle for easy viewing and the rear of the rig would fit over the seat. It also contained a place for an internal speaker and a center console area that would open for storage or could be used for writing if closed. Does anyone remember these or might know where I could find one??? You might go join the Yahoo groups "LMR" (Land Mobile Radio) and post this question there. That is a discussion group for Mobile Radio Maintenance professionals and many there go back a long ways. Ed K7AAT |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
1930's Futuristic Shortwave Wood Radio - Searchlight radio - info wanted | Shortwave | |||
some batlabs info on digital signal technology | General | |||
FS: Semiconductor Data Books | Swap | |||
OLD motorola trunking information | Scanner | |||
Bonafied Proof of LIFE AFTER DEATH -- Coal Mine Rescue | Shortwave |