Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old December 5th 04, 08:22 PM
Janusz M.
 
Posts: n/a
Default ft-200 + freq counter - help wanted!

Hello.
Anyone knows how/where plug in a frequency counter in ft-200 ?
My freq counter have option (substraction and adding to IF frequency).
Manual and schematics are at address below:
ftp://bama.edebris.com/bama/yaesu/ft200/ft200man.djvu

--
73! Janusz SQ5IZX


  #2   Report Post  
Old December 6th 04, 12:23 AM
J M Noeding
 
Posts: n/a
Default

On Sun, 5 Dec 2004 20:22:37 +0100, "Janusz M."
wrote:

Hello.
Anyone knows how/where plug in a frequency counter in ft-200 ?
My freq counter have option (substraction and adding to IF frequency).
Manual and schematics are at address below:
ftp://bama.edebris.com/bama/yaesu/ft200/ft200man.djvu


the only possible way is to measure the VFO and consider that the BFO
freq for LSB and USB makes some difference, possibly 1.8kHz

---
J. M. Noeding, LA8AK, N-4623 Kristiansand
http://home.online.no/~la8ak/c.htm
  #3   Report Post  
Old December 6th 04, 08:56 PM
Highland Ham
 
Posts: n/a
Default


"Janusz M." wrote in message
...
Hello.
Anyone knows how/where plug in a frequency counter in ft-200 ?
My freq counter have option (substraction and adding to IF frequency).
Manual and schematics are at address below:

========================================
Janusz, I have the manual for the FT-200 with the circuit diagramme.
The frequency counter input should be connected with a less than 10 pf
capacitor to the common switch contact of switch deck 'S1f ' being the
output
of V3( 6CB6) , the premixer.
This output is representative for the operating frequency.
However the frequency counter offset is NOT the same for each band
I don't know whether your FT-200 has all the sub-bands implemented ,but I
shall list them all :

80 m 3.5 - 4.0 MHz premix freq range 5.0 - 5.5 MHz hence
freq counter offset : minus 1.5 MHz
40 m 7.0 - 7.5 MHz premix freq range 16.0 - 16.5 MHz hence
freq counter offset : minus 9.0 MHz
20 m 14.0 - 14.5 MHz premix freq range 5.0 - 5.5 MHz hence
freq counter offset : plus 9.0 MHz
15 m 21.0 - 21.5 MHz premix freq range 30.0- 30.5 MHz hence
freq counter offset : minus 9.0 MHz
10 m 28.0 - 28.5 MHz premix freq range 37.0- 37.5 MHz hence
freq counter offset : minus 9.0 MHz
28.5 -29.0 MHz premix freq range 37.5- 38.0 MHz
hence freq counter offset : minus 9.0 MHz
29.0 -29.5 MHz premix freq range 38.0- 38.5 MHz
hence freq counter offset : minus 9.0 MHz
29.5 -30.0 MHz premix freq range 38.5- 39.0 MHz
hence freq counter offset : minus 9.0 MHz

So you need 3 different offsets namely minus 1.5 MHz for 80 m band , plus
9.0 MHz for the 20 m band
and for all the other bands the offset is minus 9.0 MHz.
Suggest you use the smallest coupling capacitor necessary to excite the
frequency
counter and ensure the outgoing lead is properly screened and insulated ie
thin coax
(screen earthed on 1 side only to prevent an earth loop)
As a small 'capacitor' you can possibly use a short piece of (thin) coax.

Good luck

Frank GM0CSZ / KN6WH





Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
WTB Heathkit IM-2420 Freq Counter for Parts Steve Boatanchors 0 June 9th 04 08:47 PM
WTB Heathkit IM-2420 Freq Counter for Parts Steve Equipment 0 June 9th 04 08:47 PM
WTB Heathkit IM-2420 Freq Counter for Parts Steve Equipment 0 June 9th 04 08:47 PM
AD9850 DDS - Help prevent suicide Tim Homebrew 6 October 23rd 03 03:31 AM
AD9850 DDS - Help prevent suicide Tim Homebrew 0 October 17th 03 06:20 AM


All times are GMT +1. The time now is 05:47 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017