Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Cheap, Small TNC?
I was working on designing a surface mount PC board to build up a
bunch of Bob Ball's nifty $25 PIC-based TNCs together so every RACES radio would have one built-in. . . and then read the source code and discovered it doesn't do AX.25 connected mode! Any suggestions for a TNC that: - Is cheap enough I can afford to give away 20 of them, - Is small enough to install inside a mobile radio, - Is AX.25 connected mode capable, - Is NOT KISS or APRS (UI) specific, - Is NOT dependant on ANY PC interaction or support, - Will digipeat. So far I can't find anything that meets all those requirements. We are currently using a limited number of Alinco internal TNCs but they are expensive, don't digi and only work with Alinco radios. And - NO - I'm NOT looking for a different way to do what I need to do: it's Plain Old AX.25 connected mode; NOTHING ELSE! Thanks in advance, Bill - WB1GOT |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Small City-lot 160,75,40,20 | Antenna | |||
S350 - same cheap junk as Tecsun/Eton BCL-2000,3000 ! | Shortwave | |||
Small VHF/UHF TV Broadcast Ant. (Channelmaster vs. Winegard) | Antenna | |||
cheap power supply | Antenna | |||
small 10 meter beam for satellite RX | Antenna |