Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old August 2nd 05, 12:17 AM
 
Posts: n/a
Default Info needed: Syntor X9000 150-170 Need 144-148 MHz.

Info needed: Syntor X9000 150-170 Need 144-148 MHz. I bought a
Syntor X9000 Model/T99KX-037W, ID/T73KXJ7J04BK
and its on 150-170MHz Will it go on 144-148MHz easy??
Rich
  #3   Report Post  
Old August 2nd 05, 02:21 AM
Ed
 
Posts: n/a
Default



Info needed: Syntor X9000 150-170 Need 144-148 MHz. I bought a
Syntor X9000 Model/T99KX-037W, ID/T73KXJ7J04BK
and its on 150-170MHz Will it go on 144-148MHz easy??
Rich


If memory still serves me, I'm pretty sure that it will.... although it
may take a special "ham" version of the Motorola software, along with the
X9000 interface cable and a RIB. There are second party vendors with
programming software/hardware too.

Don't forget to check out info on this subject at
http://www.batlabs.com



Ed K7AAT

  #4   Report Post  
Old August 2nd 05, 03:02 PM
Dr. Anton T. Squeegee
 
Posts: n/a
Default

In article , ritchi50
@optonline.net says...

Info needed: Syntor X9000 150-170 Need 144-148 MHz. I bought a
Syntor X9000 Model/T99KX-037W, ID/T73KXJ7J04BK
and its on 150-170MHz Will it go on 144-148MHz easy??


FWIW: The 'T99X...' string of characters is not the radio's model
number. The field under 'ID' is. What happened is that Motorola got a
bunch of bum labels at one time. Rather than replace them, which would
have been costly, they simply ran with it, figuring that field techs
would be smart enough to know the difference.

Now, with that said: In order to even test that radio, you will
need an appropriate Syntor X9000 control head, mic, speaker, AND control
cable. NEVER connect an X9000 series radio to a standard Syntor control
head group! Magic smoke will be released.

As to the question of ham bands: The answer is 'maybe.' What is
required is that the receiver's RF deck be sweep-tuned, using a spectrum
analyzer/tracking generator combo OR an RF network analyzer, to
accommodate the 2m band. This is a tricky process that takes about an
hour to do properly (I know... I've done several).

Following the retuning, you will need to program the radio using
the appropriate software (no longer available from Motorola, as a
special 'ham' version was required to do ham frequencies), a RIB (Radio
Interface Box, about $100 or so if you buy one used), and the
appropriate programming cable (about another $50).

You will also, to use the software, require an old computer, no
faster than a 486/33, running TRUE MS-DOS. You cannot use a "DOS
Window" on a Windows system. It Just Won't Work. The preferred platform
is a 386/16 or /33. You can often find such older systems at used-
computer places for cheap.

Intimidated yet? ;-) If all the above sounds like too much and too
expensive, I would be happy to do the conversion for you. It'd probably
run about $50-$60 in labor, assuming there's nothing else wrong with the
radio, and assuming you have all the accessories (the control head and
radio make up a matched pair).

Details are available at http://www.bluefeathertech.com/rf.html

Happy hunting.



--
Dr. Anton T. Squeegee, Director, Dutch Surrealist Plumbing Institute.
(Known to some as Bruce Lane, ARS KC7GR,
kyrrin (a/t) bluefeathertech[d=o=t]calm -- www.bluefeathertech.com
"If Salvador Dali had owned a computer, would it have been equipped
with surreal ports?"
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Motorola Info needed L Swap 0 July 22nd 04 05:11 AM
60 meter mod info needed... Richard Heindel Equipment 4 June 27th 04 03:06 PM
60 meter mod info needed... Richard Heindel Equipment 0 June 26th 04 04:12 PM
Info in mil. receiver needed Tom Lager Boatanchors 10 November 1st 03 04:35 AM
Vee Beam info needed W5DXP Antenna 5 August 6th 03 07:39 AM


All times are GMT +1. The time now is 04:39 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017