A Radio forum. RadioBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » RadioBanter forum » rec.radio » Swap
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

WTB: Schematic for Hallicrafters SX-17



 
 
Thread Tools Display Modes
  #1  
Old October 18th 04, 08:38 PM
Eugene Rippen
Guest
 
Posts: n/a
Default WTB: Schematic for Hallicrafters SX-17

I want to buy the schematic for a SX-17 that I am working on.
I have a manual with a schematic, and I have Rider's. Neither of which is
the schematic for my set.
The set I have has a wirewound resister under the chassis, rivited to the
back of the set. Its one of those cheap flat metal wrapped ones. It has one
"center" tap. It is in series with the B+, it is now about 15 ohms center
tapped (roughly). I am about 98 % certain that this is original.
So ......... I would like to have the correct schematic ........... or at
least one that shows this part .... since the troubles I'm working on have
to do with B+.

Eugene Rippen, WB6SZS





----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups
---= East/West-Coast Server Farms - Total Privacy via Encryption =---
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
HELP! Need Heathkit TC-1 Schematic (Tube Tester) Marc Swap 0 February 26th 04 03:10 AM
Heathkit SB series LMO Schematic Request Jim Flanagan Boatanchors 7 January 3rd 04 11:19 PM
ICOM 3230H Schematic (Free) Larry Wald Swap 0 December 24th 03 10:41 PM
Kenwood TM-231A Schematic Needed for Modification Don Smith Equipment 0 December 22nd 03 06:52 PM
Kenwood TM-231A Schematic Needed for Modification Don Smith Equipment 0 December 22nd 03 06:52 PM


All times are GMT +1. The time now is 08:54 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 2004-2014 RadioBanter.
The comments are property of their posters.