LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #9   Report Post  
Old July 31st 06, 01:57 AM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 1,614
Default Reflection on Resistive loads

Walter Maxwell wrote:
On Sun, 30 Jul 2006 16:04:10 -0700, "Bob Agnew" wrote:
Actually, if there are reflections, the voltage and current ar NEVER in
phase.


In fact, voltage and current in the reflected wave are ALWAYS 180° out of phase,
while in the forward wave they are always in phase. Thus, along the line they
alternately add and subtract, first reinforcing and then cancelling each other
at every quarter wave, to form the standing wave.


All true, Walt, but I think we are discussing the net voltage
and net current which are in phase only every 1/4 wavelength
where the SWR circle crosses the horizontal purely resistive
line on the Smith Chart.
--
73, Cecil http://www.qsl.net/w5dxp
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Reflection Loss Reg Edwards Antenna 19 March 7th 06 08:15 PM
ping Telamon: re resistive Vs transformer splitters [email protected] Shortwave 0 April 21st 05 12:07 AM
Calculus not needed (was: Reflection Coefficient Smoke Clears a Bit) David or Jo Anne Ryeburn Antenna 17 December 13th 03 11:48 AM
Reflection Coefficient Challenge Solved Richard Harrison Antenna 5 September 12th 03 09:25 PM
50 Ohms "Real Resistive" impedance a Misnomer? Dr. Slick Antenna 255 July 30th 03 12:24 AM


All times are GMT +1. The time now is 08:27 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017