RadioBanter

RadioBanter (https://www.radiobanter.com/)
-   Antenna (https://www.radiobanter.com/antenna/)
-   -   Sperrtopfantenne (https://www.radiobanter.com/antenna/100121-sperrtopfantenne.html)

Michel July 29th 06 03:27 PM

Sperrtopfantenne
 
I am looking for a schematic for a homebrew Sperrtopfantenne. I like te
construcion pretty much, but I was not able to find construcion plans on the
internet.

Who helps?

Regards,

Michel
PD1AIW the Netherlands



Fabian Kurz July 29th 06 03:34 PM

Sperrtopfantenne
 
Michel wrote:
I am looking for a schematic for a homebrew Sperrtopfantenne. I like te
construcion pretty much, but I was not able to find construcion plans on the
internet.


Second google hit for "Sperrtopf" brought up this article
including construction plans:
http://download.antennex.com/hws/ws1002/sperrtopf.pdf

73,
--
Fabian Kurz, DJ1YFK * Dresden, Germany * http://fkurz.net/
Online Log: http://dl0tud.tu-dresden.de/~dj1yfk/log.html

Michel July 29th 06 03:51 PM

Sperrtopfantenne
 


Second google hit for "Sperrtopf" brought up this article
including construction plans:
http://download.antennex.com/hws/ws1002/sperrtopf.pdf

73,
--
Fabian Kurz, DJ1YFK * Dresden, Germany * http://fkurz.net/
Online Log: http://dl0tud.tu-dresden.de/~dj1yfk/log.html


Great... I must be searching with my eyes closed!



Allodoxaphobia July 29th 06 04:37 PM

Sperrtopfantenne
 
On Sat, 29 Jul 2006 16:51:15 +0200, Michel wrote:


Second google hit for "Sperrtopf" brought up this article
including construction plans:
http://download.antennex.com/hws/ws1002/sperrtopf.pdf

73,
--
Fabian Kurz, DJ1YFK * Dresden, Germany * http://fkurz.net/
Online Log: http://dl0tud.tu-dresden.de/~dj1yfk/log.html


Great... I must be searching with my eyes closed!


I believe I see an error in "Fig. 1" in that document. The text to the
left states you need a" Copper pipe with a diameter of 10 mm and a
length of 1480 mm". Correct. However, the diagram claims a length of
1480 mm from the top of the antenna to the top of the sleeve. Wrong!
That length on the figure should be 975 mm and/or the diagram should
have been drawn to show that the 1480 mm length is from the tip to the
_bottom_ of the entire assembly.

Nicely done document.

HTH es 73
Jonesy
--
Marvin L Jones | jonz | W3DHJ | linux
38.24N 104.55W | @ config.com | Jonesy | OS/2
*** Killfiling google posts: http//jonz.net/ng.htm


All times are GMT +1. The time now is 07:17 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com