| Home |
| Search |
| Today's Posts |
|
#3
January 13th 04, 05:30 PM
|
|||
|
|||
Cecil Moore wrote: Reg Edwards wrote: So in an antenna system, in general, we have 3 consectutive transmission lines sections with the loading coil forming the center section. Because of the high inductance of the loading coil, Zo = Sqrt(L/C) will have a much higher value than that of a wire of the same straight length. (Rhetorical Question) Given that the coil section resembles a high-Zo transmission line with reflections, how can the current into the coil section be equal in magnitude and phase to the current out of the coil section? -- 73, Cecil http://www.qsl.net/w5dxp Maybe it's a half wavelength long? ;-) 73, Jim AC6XG |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
| Loading Coils in 20th ARRL Antenna Book | Antenna | |||
| Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
| Current in antenna loading coils controversy | Antenna | |||
| Current in antenna loading coils controversy - new measurement | Antenna | |||
Threaded Mode
