Remember Me?
Menu
Home
Search
Today's Posts
Home
Search
Today's Posts
RadioBanter
»
rec.radio.amateur
»
Antenna
>
Looking for a base antenna for a Yeasu 8900R
LinkBack
Thread Tools
Search this Thread
Display Modes
Prev
Next
#
6
November 11th 06, 02:36 PM posted to rec.radio.amateur.antenna
Christopher Cox
external usenet poster
First recorded activity by RadioBanter: Sep 2006
Posts: 33
Looking for a base antenna for a Yeasu 8900R
wrote:
On Thu, 09 Nov 2006 18:28:51 -0600, Bob Bob wrote:
I don't know the radio at all! I also never troubled myself to find out
what Technician limitations were!
What I am trying to get at is that if you want one antenna to do the
job, it isn't going to work as well as three antennas, one for each of
the bands (6/2/70) you are interested in. Like a said a dual (or more)
band design will be a compromise. This is not the same kind of issue you
might get on HF (you mentioned G5RV). Ionospheric propagation on HF is
(kind of) happy with a radiation pattern that isn't horizontal to the
ground. On VHF/UHF it is very important however to get the pattern as
close to the horizontal as possible, hence these antenna designs can be
said to be more critical.
If for example you constructed a vertical halfwave on 6m, the same
antenna fed on 2m would have much of its radiation going skyward at a
steep angle...
This begs the question, do you want to buy or build? There are some nice
2/70 dual band antennas out there that might be a good initial
purchase. Have no idea what they cost or how good they are though.
Cheers Bob W5/VK2YQA (Australian in East Texas!)
wrote:
I'm not sure what you mean by half of the bands when the radio only
does FM and on 4 bands only. 10M, 6M, 2M, & 70cm. I don't even care
about the 10M as I'm just a tech with no intrest in becoming a
general.
We have several 6M repeaters around here and it'll do 6M simplex on
50W. A beam will get me a lot of distance.
Of course I could buy an Icom 706 MK-II G and then just get a hor beam
or use a G5RV.
I'm really not too intrested in building. Hands are too shakky.
However I did find a nice Cushcraft tri band FM beam. It'll do 6M,
2M, and 70cm. This is what I want. One antenna. I've only got one
pole. The pole is already there. Its a 55 ft pushup pole. Its not a
tower but then my funds are limited. I get maybe $1K per year for
equipment and sometimes not that much.
Now I'm thinking of an antenna for the same freqs but for SSB.
Hello,
Not being an expert, and there are a few he
If you do not want to spend allot of time building....
I would modify a Diamond HV7A or CR8900A mobile into a base
configuration with either radials to make it a ground plane or two (2)
of them mounted in a dipole configuration.
This would be rugged and efficient.
Regards,
Chris
Reply With Quote
Thread Tools
Search this Thread
Show Printable Version
Search this Thread
:
Advanced Search
Display Modes
Switch to Linear Mode
Switch to Hybrid Mode
Threaded Mode
Posting Rules
Smilies
are
On
[IMG]
code is
On
HTML code is
Off
Trackbacks
are
On
Pingbacks
are
On
Refbacks
are
On
Similar Threads
Thread
Thread Starter
Forum
Replies
Last Post
Inverted ground plane antenna: compared with normal GP and low dipole.
Serge Stroobandt, ON4BAA
Antenna
8
February 24th 11
10:22 PM
Part # 2 - The Simplest Shortwave Listener (SWL) Antennas That I Know Of . . .
RHF
Shortwave
0
June 2nd 06
10:57 AM
Poor quality low + High TV channels? How much dB in Preamp?
lbbs
Antenna
16
December 13th 03
03:01 PM
Poor quality low + High TV channels? How much dB in Preamp?
lbbs
Shortwave
16
December 13th 03
03:01 PM
QST Article: An Easy to Build, Dual-Band Collinear Antenna
Serge Stroobandt, ON4BAA
Antenna
12
October 16th 03
07:44 PM
All times are GMT +1. The time now is
09:37 AM
.
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
Contact Us
RadioBanter forum home
Privacy Statement
Copyright © 2017
LinkBack
LinkBack URL
About LinkBacks