I'm looking for an antenna for a Yeasu 8900R. 4 band base radio. Its
not a base radio but I'll be using it as such.

thanks

My gut feel is that even if an antenna existed that you could buy, it
would be a major compromise on (say) half of the bands. Depending on how
unscrupulous the seller was they may (say) make gain claims on lobes
that are nowhere near in the direction you want! Its relatively easy to
load a multiband antenna (for low VSWR etc). Its another matter to make
it radiate where you want it to.

I's personally look at the two band market and get two antennas. 2/70
for example seem to have some good designs. If you feel like building
have a look at an extended double zepp design with a larger hairpin section.

Cheers Bob VK2YQA

wrote:

I'm looking for an antenna for a Yeasu 8900R. 4 band base radio. Its
not a base radio but I'll be using it as such.

thanks

On Thu, 09 Nov 2006 08:08:45 -0600, Bob Bob wrote:

My gut feel is that even if an antenna existed that you could buy, it
would be a major compromise on (say) half of the bands. Depending on how
unscrupulous the seller was they may (say) make gain claims on lobes
that are nowhere near in the direction you want! Its relatively easy to
load a multiband antenna (for low VSWR etc). Its another matter to make
it radiate where you want it to.

I's personally look at the two band market and get two antennas. 2/70
for example seem to have some good designs. If you feel like building
have a look at an extended double zepp design with a larger hairpin section.

Cheers Bob VK2YQA

wrote:

I'm looking for an antenna for a Yeasu 8900R. 4 band base radio. Its
not a base radio but I'll be using it as such.

thanks


I'm not sure what you mean by half of the bands when the radio only
does FM and on 4 bands only. 10M, 6M, 2M, & 70cm. I don't even care
about the 10M as I'm just a tech with no intrest in becoming a
general.

We have several 6M repeaters around here and it'll do 6M simplex on
50W. A beam will get me a lot of distance.

Of course I could buy an Icom 706 MK-II G and then just get a hor beam
or use a G5RV.

I don't know the radio at all! I also never troubled myself to find out
what Technician limitations were!

What I am trying to get at is that if you want one antenna to do the
job, it isn't going to work as well as three antennas, one for each of
the bands (6/2/70) you are interested in. Like a said a dual (or more)
band design will be a compromise. This is not the same kind of issue you
might get on HF (you mentioned G5RV). Ionospheric propagation on HF is
(kind of) happy with a radiation pattern that isn't horizontal to the
ground. On VHF/UHF it is very important however to get the pattern as
close to the horizontal as possible, hence these antenna designs can be
said to be more critical.

If for example you constructed a vertical halfwave on 6m, the same
antenna fed on 2m would have much of its radiation going skyward at a
steep angle...

This begs the question, do you want to buy or build? There are some nice
2/70 dual band antennas out there that might be a good initial
purchase. Have no idea what they cost or how good they are though.

Cheers Bob W5/VK2YQA (Australian in East Texas!)

wrote:



I'm not sure what you mean by half of the bands when the radio only
does FM and on 4 bands only. 10M, 6M, 2M, & 70cm. I don't even care
about the 10M as I'm just a tech with no intrest in becoming a
general.

We have several 6M repeaters around here and it'll do 6M simplex on
50W. A beam will get me a lot of distance.

Of course I could buy an Icom 706 MK-II G and then just get a hor beam
or use a G5RV.

On Thu, 09 Nov 2006 18:28:51 -0600, Bob Bob wrote:

I don't know the radio at all! I also never troubled myself to find out
what Technician limitations were!

What I am trying to get at is that if you want one antenna to do the
job, it isn't going to work as well as three antennas, one for each of
the bands (6/2/70) you are interested in. Like a said a dual (or more)
band design will be a compromise. This is not the same kind of issue you
might get on HF (you mentioned G5RV). Ionospheric propagation on HF is
(kind of) happy with a radiation pattern that isn't horizontal to the
ground. On VHF/UHF it is very important however to get the pattern as
close to the horizontal as possible, hence these antenna designs can be
said to be more critical.

If for example you constructed a vertical halfwave on 6m, the same
antenna fed on 2m would have much of its radiation going skyward at a
steep angle...

This begs the question, do you want to buy or build? There are some nice
2/70 dual band antennas out there that might be a good initial
purchase. Have no idea what they cost or how good they are though.

Cheers Bob W5/VK2YQA (Australian in East Texas!)

wrote:



I'm not sure what you mean by half of the bands when the radio only
does FM and on 4 bands only. 10M, 6M, 2M, & 70cm. I don't even care
about the 10M as I'm just a tech with no intrest in becoming a
general.

We have several 6M repeaters around here and it'll do 6M simplex on
50W. A beam will get me a lot of distance.

Of course I could buy an Icom 706 MK-II G and then just get a hor beam
or use a G5RV.



I'm really not too intrested in building. Hands are too shakky.
However I did find a nice Cushcraft tri band FM beam. It'll do 6M,
2M, and 70cm. This is what I want. One antenna. I've only got one
pole. The pole is already there. Its a 55 ft pushup pole. Its not a
tower but then my funds are limited. I get maybe $1K per year for
equipment and sometimes not that much.

Now I'm thinking of an antenna for the same freqs but for SSB.

wrote:
On Thu, 09 Nov 2006 18:28:51 -0600, Bob Bob wrote:


I don't know the radio at all! I also never troubled myself to find out
what Technician limitations were!

What I am trying to get at is that if you want one antenna to do the
job, it isn't going to work as well as three antennas, one for each of
the bands (6/2/70) you are interested in. Like a said a dual (or more)
band design will be a compromise. This is not the same kind of issue you
might get on HF (you mentioned G5RV). Ionospheric propagation on HF is
(kind of) happy with a radiation pattern that isn't horizontal to the
ground. On VHF/UHF it is very important however to get the pattern as
close to the horizontal as possible, hence these antenna designs can be
said to be more critical.

If for example you constructed a vertical halfwave on 6m, the same
antenna fed on 2m would have much of its radiation going skyward at a
steep angle...

This begs the question, do you want to buy or build? There are some nice
2/70 dual band antennas out there that might be a good initial
purchase. Have no idea what they cost or how good they are though.

Cheers Bob W5/VK2YQA (Australian in East Texas!)

wrote:



I'm not sure what you mean by half of the bands when the radio only
does FM and on 4 bands only. 10M, 6M, 2M, & 70cm. I don't even care
about the 10M as I'm just a tech with no intrest in becoming a
general.

We have several 6M repeaters around here and it'll do 6M simplex on
50W. A beam will get me a lot of distance.

Of course I could buy an Icom 706 MK-II G and then just get a hor beam
or use a G5RV.




I'm really not too intrested in building. Hands are too shakky.
However I did find a nice Cushcraft tri band FM beam. It'll do 6M,
2M, and 70cm. This is what I want. One antenna. I've only got one
pole. The pole is already there. Its a 55 ft pushup pole. Its not a
tower but then my funds are limited. I get maybe $1K per year for
equipment and sometimes not that much.

Now I'm thinking of an antenna for the same freqs but for SSB.



Hello,

Not being an expert, and there are a few he

If you do not want to spend allot of time building....

I would modify a Diamond HV7A or CR8900A mobile into a base
configuration with either radials to make it a ground plane or two (2)
of them mounted in a dipole configuration.

This would be rugged and efficient.

Regards,

Chris

You might also consider putting the multiband FM beam antenna on a bell
crank arrangement to give it changeable polarization. Depending on the
antenna the performance at the SSB end of the band may not be superb,
but the polarization change will get you in the ball park.

I had a 5 element yagi on 2M that normally mounted in front of a mast. I
loosened its pipe clamp and pushed the boom back, then attached a
diagonal brace to where it protruded behind the mast. Two pieces of rope
then solved the polarization change!

Cheers Bob VK2YQA

wrote:


I'm really not too intrested in building. Hands are too shakky.
However I did find a nice Cushcraft tri band FM beam. It'll do 6M,
2M, and 70cm. This is what I want. One antenna. I've only got one
pole. The pole is already there. Its a 55 ft pushup pole. Its not a
tower but then my funds are limited. I get maybe $1K per year for
equipment and sometimes not that much.

Now I'm thinking of an antenna for the same freqs but for SSB.