Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]() wrote in message oups.com... Sorry I mispoke earlier. Let me restate this. Hyperlink has an 8pole filter for several of the 802.11b channels that has the mask -3db at +- 10Mhz, -5db at +-15Mhz, -20dB +- 20Mhz. Essentially I want to keep 2.417 to 2.437 Ghz, so one of their filters centered at 802.11b, channel 4 would be ideal, except that they only sell centered at the standard channels (channel 3 and 6 are the closest), so in short I was wondering if anyone knows of a vendor that sells such a filter centered at 2.427Ghz. Thanks for any suggestions. Can't you do this at IF? Tam |
#2
![]() |
|||
|
|||
![]()
Tam/WB2TT wrote:
wrote in message oups.com... Sorry I mispoke earlier. Let me restate this. Hyperlink has an 8pole filter for several of the 802.11b channels that has the mask -3db at +- 10Mhz, -5db at +-15Mhz, -20dB +- 20Mhz. Essentially I want to keep 2.417 to 2.437 Ghz, so one of their filters centered at 802.11b, channel 4 would be ideal, except that they only sell centered at the standard channels (channel 3 and 6 are the closest), so in short I was wondering if anyone knows of a vendor that sells such a filter centered at 2.427Ghz. Thanks for any suggestions. Can't you do this at IF? Tam He might with a hi Q cavity. -- Baron: |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Connecting several bandpass filters. | Antenna | |||
FS: Ceramic / Crystal / Mechanical filters | Swap | |||
Channel-based AM tube tuner (was Designs for a single frequency high performance AM-MW receiver?) | Shortwave | |||
Debugging of LC Bandpass Filters | Homebrew | |||
Debugging of LC Bandpass Filters | Homebrew |