2m Big Wheel Plans - Again
 

Ok, let's try this again.

I googled for plans. Thanks to those that gave me the results I already
found, but they were still useless.

One person responded via email, thank you sir.

The others wandered off on related subjects, as this list is want
(wont?) to do. That is just fine, I have no problem with that, we learn
much that way. I hope we get a decent ez file out of it. And whether
it shows the impedance change when stacked that the articles speak of.

Now, does anyone have any plans with things like dimensions? Other than
the original 1961 version, which has to have been tweaked at least a little.

Thanks.

tom
K0TAR

2m Big Wheel Plans - Again
 

On Fri, 08 Dec 2006 19:38:30 -0600, Tom Ring
wrote:

Ok, let's try this again.

I googled for plans. Thanks to those that gave me the results I already
found, but they were still useless.

One person responded via email, thank you sir.

The others wandered off on related subjects, as this list is want
(wont?) to do. That is just fine, I have no problem with that, we learn
much that way. I hope we get a decent ez file out of it. And whether
it shows the impedance change when stacked that the articles speak of.

Now, does anyone have any plans with things like dimensions? Other than
the original 1961 version, which has to have been tweaked at least a little.

Thanks.

tom
K0TAR

There are two articles at http://6mt.com/2tech.htm and the one I saw
with my Windows fax viewer has dimensions in inches, and the type can
be blown up pretty big with the viewer. ??

bob
k5qwg

2m Big Wheel Plans - Again
 

On Sat, 09 Dec 2006 18:51:28 GMT, Bob Miller
wrote:

On Fri, 08 Dec 2006 19:38:30 -0600, Tom Ring
wrote:

Ok, let's try this again.

I googled for plans. Thanks to those that gave me the results I already
found, but they were still useless.

One person responded via email, thank you sir.

The others wandered off on related subjects, as this list is want
(wont?) to do. That is just fine, I have no problem with that, we learn
much that way. I hope we get a decent ez file out of it. And whether
it shows the impedance change when stacked that the articles speak of.

Now, does anyone have any plans with things like dimensions? Other than
the original 1961 version, which has to have been tweaked at least a little.

Thanks.

tom
K0TAR

There are two articles at http://6mt.com/2tech.htm and the one I saw
with my Windows fax viewer has dimensions in inches, and the type can
be blown up pretty big with the viewer. ??

bob
k5qwg

(Make that 3 articles, two from QST and one more handwritten.)

bob
k5qwg

2m Big Wheel Plans - Again
 

Tom- Took the liberty to send you the article in
..pdf format- 2 pages, but big files- 4 meg each!
Tho looks good on my monitor- any one else want
these,email me at my address-
Jim


Bob Miller wrote:
On Fri, 08 Dec 2006 19:38:30 -0600, Tom Ring
wrote:

Ok, let's try this again.

I googled for plans. Thanks to those that gave me the results I already
found, but they were still useless.

One person responded via email, thank you sir.

The others wandered off on related subjects, as this list is want
(wont?) to do. That is just fine, I have no problem with that, we learn
much that way. I hope we get a decent ez file out of it. And whether
it shows the impedance change when stacked that the articles speak of.

Now, does anyone have any plans with things like dimensions? Other than
the original 1961 version, which has to have been tweaked at least a little.

Thanks.

tom
K0TAR

There are two articles at http://6mt.com/2tech.htm and the one I saw
with my Windows fax viewer has dimensions in inches, and the type can
be blown up pretty big with the viewer. ??

bob
k5qwg

2m Big Wheel Plans - Again
 

I picked up an original 2m "BIG WHEEL" over the weekend - this will get
mounted with my pair of original "SATURN SIX HALO'S stacked 6ft apart
horizontally".

I plan taking the wheel apart - changing the rusted hardware and cleaning up
the aluminum rods and other pieces - replacing both of the mounting
U-bolts - I will measure the element lengths and take some pictures -

Please - email me off line for copies of the photos if you need them.

"Tom Ring" wrote in message
.. .
Ok, let's try this again.

I googled for plans. Thanks to those that gave me the results I already
found, but they were still useless.

One person responded via email, thank you sir.

The others wandered off on related subjects, as this list is want (wont?)
to do. That is just fine, I have no problem with that, we learn much that
way. I hope we get a decent ez file out of it. And whether it shows the
impedance change when stacked that the articles speak of.

Now, does anyone have any plans with things like dimensions? Other than
the original 1961 version, which has to have been tweaked at least a
little.

Thanks.

tom
K0TAR