just what sort of anttnena modeling software is out and (de)merits of them
 

since IT is done I am looking dealing hf attnenas seriosuly for the
first what sort of software is out there for medeling real attneas hi
hf bands and maybe something of the pros and cons of them

just what sort of anttnena modeling software is out and (de)merits of them
 

an_old_friend wrote:
since IT is done I am looking dealing hf attnenas seriosuly for the
first what sort of software is out there for medeling real attneas hi
hf bands and maybe something of the pros and cons of them

Try posting your question in a known language. If you have a valid
License, it must have been obtained under false pretensis. Normally
this group uses English. If you could pose your question better, you
might get an answer.
Gary N4AST

just what sort of anttnena modeling software is out and (de)merits of them
 

On 20 Dec 2006 16:35:08 -0800, wrote:


an_old_friend wrote:
since IT is done I am looking dealing hf attnenas seriosuly for the
first what sort of software is out there for medeling real attneas hi
hf bands and maybe something of the pros and cons of them

Try posting your question in a known language. If you have a valid
License, it must have been obtained under false pretensis. Normally
this group uses English. If you could pose your question better, you
might get an answer.
Gary N4AST

Gary, I wonder if you have a second language? If you did you would
understand.

Yes, the question is rough English, but I could understand the IT.

I suggest you get off your high horse and make as much effort in
trying to understand the posting as the poster did in trying to post
it.

Thinking in another language, especially in later years, is very
difficult. If you haven't done it then I suggest you not criticize.

Danny, K6MHE

just what sort of anttnena modeling software is out and (de)merits of them
 

wrote:

stop the fraud steve

just what sort of anttnena modeling software is out and (de)merits of them
 

Here we go again........
Simple question, understandable, flame, more flames.

Hey, Merry Christmas to you guys.

The answer to the original question is, there are a few (at least 3 I know
of).
EZNEC is a favorite of many on this newsgroup and can be tried out for free.
4NEC2 is another. There is a list of some at this link:
http://www.dxzone.com/catalog/Softwa...enna_analysis/
If you do a google search of "NEC4 antenna model" or similar you will get
more than you can handle.

Myself, I have used 4NEC2 and getting somewhat familiar with it. Once I
researched the concept of "cards" it suddenly made sense to me.
I believe these NEC2 programs use the same "engine" meaning when your front
end program generates the data, it is fed to the same calculating software,
regardless of the program. So the main difference in the programs is how
convenient they make it for you to enter your data, the display of the
results, and of course the support you get to go along with it. In that
category I have heard nothing but praise for W7EL, Roy, who participates on
this newsgroup and has been involved with modeling software for a very long
time.

There is also an email reflector on the subject. I don't have the info
handy right now but I am sure you can find it (as well as anything else in
the universe) with a google search. Read the archives there and you will
find tons of info and supportive help. This newsgroup is a little tough,
because the subjects range all over the place, and there are so many guys
who have their rifles loaded and just looking for someone to make a false
move.

Tell you what I'm going to do. I will post another article following this
one and give you some idea of what I expereinced with my first attempt at
modeling. This may give you some ideas of what to expect.

Rick K2XT

just what sort of anttnena modeling software is out and (de)merits of them
 

I believe the proper spelling is "pretenses", you pompous horse's ass.

Jim


wrote in message

ups.com...
If you have a valid
License, it must have been obtained under false pretensis.

just what sort of anttnena modeling software is out and (de)merits of them
 

Rick wrote:
Here we go again........
Simple question, understandable, flame, more flames.

Hey, Merry Christmas to you guys.

thank and happy hanukah to you