I recently built a modified vertical dipole
from wire and using a pole and trees as supports.
I had hoped it would work on 2 bands 75 and 40 but it only
works on one 75 where the VSWR is 1.3:1 and the bandwidth is 85 khz
for the 2:1 points.

On 40 meters the VSWR is over 10:1 so I thought I could use a 1/4 coax
matching section 50 ohms but this doesnt solve the problem either as the
VSWR doesnt change much with the extra coax section.

I did cut the section properly as the velocity factor for the coax is .78%
which gave me 26.825 ft.

Not sure what I am doing wrong or assuming - but looks like I could
use some input.
--
I SPILLED SPOT REMOVER ON MY DOG..............AND NOW HES GONE!!