Home |
Search |
Today's Posts |
#11
|
|||
|
|||
I made the mistake of assuming one would not be stupid enough to run 275
feet of RG58. "Cecil Moore" wrote in message ... Dr. Daffodil Swain wrote: Sounds like too much work! The loss of 50 Ohm feedline at 80 and 40 meters isn't worth worrying about. For 275 ft. of RG-58 with an SWR of 1:1 on 40m, one would lose ~half of one's power in the feedline. With an SWR of 10:1, one would lose ~75% of one's power in the feedline. -- 73, Cecil http://www.qsl.net/w5dxp -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- |
#12
|
|||
|
|||
Thanks for all the feedback. As for running 275 ft of RG58, I would not do
that, but would try something like 9913 or LMR400, etc. The only reason I am considering open wire feeders is to get ever watt to the antenna, and save the cost of good coax. As for the comment that the feedline would be part of the antenna at that long of a run, that was part of the original post, and my worrying about the antenna intself unbalancing the feedline. The way I understand it, the feedline should not radiate or be part of the antenna if it is balanced. At least I know others are doing this with success. I don't know if I would want to go to the trouble of making a three wire open wire feeder. As for the interaction of other things with the feeline, there is nothing except open field for the distance. Doug N4IJ "K9SQG" wrote in message ... I saw an ariticle from a British ham that fed a vertical with open wire line, mounted on his roof. Ground mounted might be problematic due to the fact that the feedline could not be brought away at a preferred angle. Would be an interesting experiment though! 73s, Evan |
#13
|
|||
|
|||
Dr. Daffodil Swain wrote:
I made the mistake of assuming one would not be stupid enough to run 275 feet of RG58. You said: The loss of 50 Ohm feedline at 80 and 40 meters isn't worth worrying about. RG-58 *is* 50 ohm feedline. Aren't you glad I didn't choose RG-174? :-) -- 73, Cecil http://www.qsl.net/w5dxp -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- |
#14
|
|||
|
|||
I originally wrote:
Consider using an UNBALANCED, open-wire line. It would consist of three wires fairly close together with uniform spacing between them. The center wire is "hot" and the outer two are "ground". Cecil, W5DXP asks: Hi Jim, what would be the range of Z0's possible with this configuration? Jasik has a formula for this type of line: Zo = (207/sqrt(epsilon))*(log(1.59*(Dist/dia))) where Zo is in ohms, epsilon is relative dielectric constant of surroundings (=1.0 in this case), sqrt is the square root function, log is the base-10 logarithm function, Dist is the distance between the center wire and one of the outside wires and dia is the diameter of the wires used, Dist and dia being in the same units. Setting dia=0.116 inches (#10 AWG stranded wire) and varying Dist gives: Dist = 1.0 inch ............ Zo = 235 ohms Dist = 2.0 inches .......... Zo = 297 ohms Dist = 4 inches .......... Zo = 360 ohms Dist = 10 inches .......... Zo = 442 ohms The trade-off would be between the desireable high impedance from wide spacing and leakage suppression from close spacing. Dist=4 inches looks about right. Although I haven't tried it, my guess is that common electric- fence hardware would be adequate for supports and insulation, but the conductors should be copper (and #10 gauge). Stacking the conductors vertically should simplify the mechanical aspects and possibly partially suppress sky-wave leakage from the line. Jim, K7JEB Glendale, AZ |
#15
|
|||
|
|||
Doug, N4IJ, wrote: ... As for the comment that the feedline would be part of the antenna at that long of a run, that was part of the original post, and my worrying about the antenna intself unbalancing the feedline. The way I understand it, the feedline should not radiate or be part of the antenna if it is balanced. I think that given the length of your run (275 ft) and the use of close-spaced commercial "window line", any common-mode problems on the line would sort themselves out before they got back to your shack. Giving the line a relatively tight twist (1 twist/6 inches) might help too. Given that you intend to drive a relatively non-directional antenna, I don't think feedline radiation will be a big problem system-wise if it is 1/10 the total radiated power. (ie: suppressed 10 dB). Nobody wants to take me up on the unbalanced ladder-line. Oh, well! Jim, K7JEB Glendale, AZ |
#16
|
|||
|
|||
K7JEB wrote:
Nobody wants to take me up on the unbalanced ladder-line. Oh, well! Hi Jim, I'm thinking it has a distinct advantage over balanced ladder- line. It appears to me that it can be formed into a helix where the outside insulated wires are touching without suffering the ill effects of balanced ladder-line. This is interesting to me because I vary the length of the ladder-line to achieve a match. Now if it could only be coiled up in a box like coax. -- 73, Cecil http://www.qsl.net/w5dxp -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- |
#17
|
|||
|
|||
"Cecil Moore" wrote in message ... Dr. Daffodil Swain wrote: Sounds like too much work! The loss of 50 Ohm feedline at 80 and 40 meters isn't worth worrying about. For 275 ft. of RG-58 with an SWR of 1:1 on 40m, one would lose ~half of one's power in the feedline. With an SWR of 10:1, one would lose ~75% of one's power in the feedline. -- 73, Cecil http://www.qsl.net/w5dxp 275 feet of garden variety RG8Foam would have a loss of about 1.5 db at 10 MHz. LMR400 about 1db. Do NOT use RG213. Tam/WB2TT |
#18
|
|||
|
|||
"Tarmo Tammaru" wrote in message ... .... 275 feet of garden variety RG8Foam would have a loss of about 1.5 db at 10 MHz. LMR400 about 1db. Do NOT use RG213. What's wrong with RG213? __ Steve KI5YG .. |
#19
|
|||
|
|||
"Tarmo Tammaru" wrote in message
275 feet of garden variety RG8Foam would have a loss of about 1.5 db at 10 MHz. LMR400 about 1db. Do NOT use RG213. What's wrong with RG213? It has twice the loss. Tam/WB2TT I show it or regular rg-8 to have only about .2 db more loss per 100 ft than foam rg-8. "10 mhz" So 275 ft would be appx 2.1-2.2 or so db vs the 1.5 db. I would consider twice the loss to be 3 db loss. ..6 db should be hardly noticable. MK |
#20
|
|||
|
|||
"Mark Keith" wrote in message om... "Tarmo Tammaru" wrote in message 275 feet of garden variety RG8Foam would have a loss of about 1.5 db at 10 MHz. LMR400 about 1db. Do NOT use RG213. What's wrong with RG213? It has twice the loss. Tam/WB2TT I show it or regular rg-8 to have only about .2 db more loss per 100 ft than foam rg-8. "10 mhz" So 275 ft would be appx 2.1-2.2 or so db vs the 1.5 db. I would consider twice the loss to be 3 db loss. .6 db should be hardly noticable. MK My chart shows the following loss at 10 MHz:, per 100 feet RG213 0.8db RG8 Foam 0.55 db 9913 0.4 db LMR400 will be marginally better than 9913. By definitin of db, 1 db is the smallest change that is detected by the human ear. 6db is a factor of 4 in power. By twice the loss I meant twice the number of db. This may all be moot, because he is going to have a horrendous SWR on at least one of the bands. I would install two resonant radiators, or some kind of decoupling stubs like the Hygain HT. Tam/WB2TT |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
Mobile Ant L match ? | Antenna | |||
Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna |