| Home |
| Search |
| Today's Posts |
|
#2
|
|||
|
|||
|
An inverted-L antenna can be converted to a T-antenna just by sliding the
vertical wire from the end of the L to the centre of the T. At intermediate positions we get the original Windom antenna. The small difference in configuration between the two is unlikely to have much of an effect on signal to noise ratio. The T behaves more like a true vertical than the L. It is well known the vertical is a low-angle receiving antenna and therefore picks up more locally generated noise. So if there *IS* any difference between the two then it will be in favour of your existing inverted-L. The local noise environment, ie., where the noise is coming from, will also have an effect at least as great changing the wire configuration. But not very much. (By the way, the lengths of the T-antenna wires are non-critical. The bottom-end loading coil can be dispensed with and incorporated in the tuner if the tuner has sufficient inductance.) ---- Reg, G4FGQ ================================== "Scott Gordon" wrote - I seen in a recent article showing a Compact T Antenna for 160 Meters. Tophat is 80 ft long and the T is connected in the center and should be 40ft long with a 20uH to the feedpoint then the shield to ground. Has anyone used one of these antennas? I use a Inverted L right now and it is playing very well but the noise is S9 to 5 Over. I understand the the T Antenna is a much more quiet antenna? Thanks Scott |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
| Mobile Ant L match ? | Antenna | |||
| FS: Connectors, Antennas, Meters, Mounts, etc. | Antenna | |||
| Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
| QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna | |||