RadioBanter

RadioBanter (https://www.radiobanter.com/)
-   Antenna (https://www.radiobanter.com/antenna/)
-   -   How I would like to change the cell phone industry [was AM electromagnetic waves: 20 KHz modulation frequency on an astronomically-low carrier frequency] (https://www.radiobanter.com/antenna/121886-how-i-would-like-change-cell-phone-industry-%5B-re-am-electromagnetic-waves-20-khz-modulation-frequency-astronomically-low-carrier-frequency%5D.html)

Radium[_2_] July 15th 07 09:24 PM

How I would like to change the cell phone industry [was AM electromagnetic waves: 20 KHz modulation frequency on an astronomically-low carrier frequency]
 
On Jul 1, 7:24 am, wrote in
http://groups.google.com/group/sci.e...0c8ed13?hl=en&
:

how would u like to change the cell phone industry?


Analog cells phones should stop using FM and should start using AM
with SHF frequencies - at least 3 GHz and at most 30 GHz.

http://en.wikipedia.org/wiki/Super_high_frequency

I choose SHF frequencies because SHF seems to be the sweet spot
between frequencies that are high-enough to rip through charged
particles & provide large amounts of bandwidth, yet low-enough to be
wireless and long-distance. At EHF and above, it starts to get into
the IR range where long-distance wireless reception is not possible
and atmospheric opacity begins to dominate.

Equally important, SHF frequencies can efficiently transmit signals
using extremely small transmitters. Longer wavelengths require larger
transmitters.

Obviously there are frequencies lower than SHF -- VHF and above --
that can easily penetrate charged particles [e.g. anything resembling
the ionosphere or heliosphere]. However, lower-frequencies tend to
result in less bandwidth, so it is better to use higher-frequencies
when the application requires significant bandwidth.

I choose AM because it requires less bandwidth than FM. In addition,
AM tends to retain reception of rather weak signals, while FM
"considers" such signals to be absent.


[email protected] July 15th 07 09:45 PM

How I would like to change the cell phone industry [was AM electromagnetic waves: 20 KHz modulation frequency on an astronomically-low carrier frequency]
 
In rec.radio.amateur.antenna Radium wrote:
On Jul 1, 7:24 am, wrote in
http://groups.google.com/group/sci.e...0c8ed13?hl=en&
:


how would u like to change the cell phone industry?


Analog cells phones should stop using FM and should start using AM
with SHF frequencies - at least 3 GHz and at most 30 GHz.


Analog cell phones are going away.

Cell phones already use frequencies in the 3 GHz region.

You are an idiot.

snip crap

--
Jim Pennino

Remove .spam.sux to reply.

Brenda Ann July 15th 07 09:56 PM

How I would like to change the cell phone industry [was AM electromagnetic waves: 20 KHz modulation frequency on an astronomically-low carrier frequency]
 

wrote in message
...

Cell phones already use frequencies in the 3 GHz region.


Really? Which ones? I'm only aware of cell systems using 800, 900, 1800 and
1900 MHz. There are some (very few) multisystem phones that use all four of
those ranges.



Jeff Liebermann[_2_] July 15th 07 10:14 PM

How I would like to change the cell phone industry [was AM electromagnetic waves: 20 KHz modulation frequency on an astronomically-low carrier frequency]
 
Radium hath wroth:

how would u like to change the cell phone industry?


Analog cells phones should stop using FM and should start using AM
with SHF frequencies - at least 3 GHz and at most 30 GHz.

http://en.wikipedia.org/wiki/Super_high_frequency


Maybe if the entire cellular infrastructure would move up to the LMDS
26-30GHz band, I might recover some of the money I sunk into an LMDS
startup. Great idea. I like it.

Of course, there are problems. Nobody makes an economical mm wave
handset. There will probably need to be 8-10 times more cell sites
built than are currently in use on 800/900 and 1800/1900MHz. Of
course mm wave propagation is affected by just about everything, so it
probably won't work indoors. No problem, just add more cell sites and
repeaters. Of course you couldn't get away with the existing
relatively low power output handsets and insipid gain antennas, so
we'll just crank up the power and antenna gain on the handset and fry
a few peoples brains. It's a small sacrifice to make so I watch TV on
my cell phone.

Equally important, SHF frequencies can efficiently transmit signals
using extremely small transmitters. Longer wavelengths require larger
transmitters.


They do? I didn't know that. My 49MHz automobile alarm dongle isn't
much larger than my 2400MHz USB wi-fi dongle. Are you sure the
transmitter has to be bigger or were you thinking of the antenna?

Obviously there are frequencies lower than SHF -- VHF and above --
that can easily penetrate charged particles [e.g. anything resembling
the ionosphere or heliosphere].


I don't know of any wireless service provider that charges for
particles. What are they charging and what's the stock symbol? I've
always suspected that charged particles might be worth selling.

However, lower-frequencies tend to
result in less bandwidth, so it is better to use higher-frequencies
when the application requires significant bandwidth.


Hint: It doesn't matter what you're doing, there's never enough
bandwidth available. If you provide XX MHz of available bandwidth,
someone will immediately supply an application that required 10 times
the available bandwidth. More simply, applications tend to fill up
available bandwidth quite rapidly.

I choose AM because it requires less bandwidth than FM. In addition,
AM tends to retain reception of rather weak signals, while FM
"considers" such signals to be absent.


I'll make it really simple for you. FM is "hi-fi", while AM is noisy
"no-fi". Don't you want to be cool strutting down the street with
your iPhone watching HDTV with 7.1 sound? It wouldn't do to have it
sound like the typical AM broadcast station. For decent quality, you
gotta have FM.

This is fun. Kinda reminds me of some of the business plans I
reviewed during the dot com boom.

--
Jeff Liebermann
150 Felker St #D
http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558

Don Bowey July 15th 07 10:24 PM

Troll alert - was How I would like to change the cell phone
 
On 7/15/07 1:24 PM, in article
, "Radium"
wrote:

On Jul 1, 7:24 am, wrote in
http://groups.google.com/group/sci.e...bf90c8ed13?hl=
en&
:

how would u like to change the cell phone industry?


Analog cells phones should stop using FM and should start using AM
with SHF frequencies - at least 3 GHz and at most 30 GHz.

http://en.wikipedia.org/wiki/Super_high_frequency

I choose SHF frequencies because SHF seems to be the sweet spot
between frequencies that are high-enough to rip through charged
particles & provide large amounts of bandwidth, yet low-enough to be
wireless and long-distance. At EHF and above, it starts to get into
the IR range where long-distance wireless reception is not possible
and atmospheric opacity begins to dominate.

Equally important, SHF frequencies can efficiently transmit signals
using extremely small transmitters. Longer wavelengths require larger
transmitters.

Obviously there are frequencies lower than SHF -- VHF and above --
that can easily penetrate charged particles [e.g. anything resembling
the ionosphere or heliosphere]. However, lower-frequencies tend to
result in less bandwidth, so it is better to use higher-frequencies
when the application requires significant bandwidth.

I choose AM because it requires less bandwidth than FM. In addition,
AM tends to retain reception of rather weak signals, while FM
"considers" such signals to be absent.


Too much time on your hands again?


RHF July 15th 07 10:28 PM

. . . How I would like to change the cell phone industry [was AM electromagnetic waves: 20 KHz modulation frequency on an astronomically-low carrier frequency]
 
On Jul 15, 1:24 pm, Radium wrote:
On Jul 1, 7:24 am, wrote inhttp://groups.google.com/group/sci.electronics.basics/msg/696d6abf90c...
:

how would u like to change the cell phone industry?


Analog cells phones should stop using FM and should start using AM
with SHF frequencies - at least 3 GHz and at most 30 GHz.

http://en.wikipedia.org/wiki/Super_high_frequency

I choose SHF frequencies because SHF seems to be the sweet spot
between frequencies that are high-enough to rip through charged
particles & provide large amounts of bandwidth, yet low-enough to be
wireless and long-distance. At EHF and above, it starts to get into
the IR range where long-distance wireless reception is not possible
and atmospheric opacity begins to dominate.

Equally important, SHF frequencies can efficiently transmit signals
using extremely small transmitters. Longer wavelengths require larger
transmitters.

Obviously there are frequencies lower than SHF -- VHF and above --
that can easily penetrate charged particles [e.g. anything resembling
the ionosphere or heliosphere]. However, lower-frequencies tend to
result in less bandwidth, so it is better to use higher-frequencies
when the application requires significant bandwidth.

I choose AM because it requires less bandwidth than FM. In addition,
AM tends to retain reception of rather weak signals, while FM
"considers" such signals to be absent.


.. . .


RHF July 15th 07 10:29 PM

. . . How I would like to change the cell phone industry [was AM electromagnetic waves: 20 KHz modulation frequency on an astronomically-low carrier frequency]
 
On Jul 15, 1:45 pm, wrote:
In rec.radio.amateur.antenna Radium wrote:

On Jul 1, 7:24 am, wrote in
http://groups.google.com/group/sci.e...sg/696d6abf90c...
:
how would u like to change the cell phone industry?

Analog cells phones should stop using FM and should start using AM
with SHF frequencies - at least 3 GHz and at most 30 GHz.


Analog cell phones are going away.

Cell phones already use frequencies in the 3 GHz region.

You are an idiot.

snip crap

--
Jim Pennino

Remove .spam.sux to reply.


.. . .


RHF July 15th 07 10:30 PM

. . . How I would like to change the cell phone industry [was AM electromagnetic waves: 20 KHz modulation frequency on an astronomically-low carrier frequency]
 
On Jul 15, 2:14 pm, Jeff Liebermann wrote:
Radium hath wroth:

how would u like to change the cell phone industry?


Analog cells phones should stop using FM and should start using AM
with SHF frequencies - at least 3 GHz and at most 30 GHz.


http://en.wikipedia.org/wiki/Super_high_frequency


Maybe if the entire cellular infrastructure would move up to the LMDS
26-30GHz band, I might recover some of the money I sunk into an LMDS
startup. Great idea. I like it.

Of course, there are problems. Nobody makes an economical mm wave
handset. There will probably need to be 8-10 times more cell sites
built than are currently in use on 800/900 and 1800/1900MHz. Of
course mm wave propagation is affected by just about everything, so it
probably won't work indoors. No problem, just add more cell sites and
repeaters. Of course you couldn't get away with the existing
relatively low power output handsets and insipid gain antennas, so
we'll just crank up the power and antenna gain on the handset and fry
a few peoples brains. It's a small sacrifice to make so I watch TV on
my cell phone.

Equally important, SHF frequencies can efficiently transmit signals
using extremely small transmitters. Longer wavelengths require larger
transmitters.


They do? I didn't know that. My 49MHz automobile alarm dongle isn't
much larger than my 2400MHz USB wi-fi dongle. Are you sure the
transmitter has to be bigger or were you thinking of the antenna?

Obviously there are frequencies lower than SHF -- VHF and above --
that can easily penetrate charged particles [e.g. anything resembling
the ionosphere or heliosphere].


I don't know of any wireless service provider that charges for
particles. What are they charging and what's the stock symbol? I've
always suspected that charged particles might be worth selling.

However, lower-frequencies tend to
result in less bandwidth, so it is better to use higher-frequencies
when the application requires significant bandwidth.


Hint: It doesn't matter what you're doing, there's never enough
bandwidth available. If you provide XX MHz of available bandwidth,
someone will immediately supply an application that required 10 times
the available bandwidth. More simply, applications tend to fill up
available bandwidth quite rapidly.

I choose AM because it requires less bandwidth than FM. In addition,
AM tends to retain reception of rather weak signals, while FM
"considers" such signals to be absent.


I'll make it really simple for you. FM is "hi-fi", while AM is noisy
"no-fi". Don't you want to be cool strutting down the street with
your iPhone watching HDTV with 7.1 sound? It wouldn't do to have it
sound like the typical AM broadcast station. For decent quality, you
gotta have FM.

This is fun. Kinda reminds me of some of the business plans I
reviewed during the dot com boom.

--
Jeff Liebermann
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558


.. . .


RHF July 15th 07 10:31 PM

. . . Troll alert - was How I would like to change the cell phone industry [was AM electromagnetic waves: 20 KHz modulation frequency on an astronomically-low carrier frequency]
 
On Jul 15, 2:24 pm, Don Bowey wrote:
On 7/15/07 1:24 PM, in article
. com, "Radium"





wrote:
On Jul 1, 7:24 am, wrote in
http://groups.google.com/group/sci.e...sg/696d6abf90c...
en&
:


how would u like to change the cell phone industry?


Analog cells phones should stop using FM and should start using AM
with SHF frequencies - at least 3 GHz and at most 30 GHz.


http://en.wikipedia.org/wiki/Super_high_frequency


I choose SHF frequencies because SHF seems to be the sweet spot
between frequencies that are high-enough to rip through charged
particles & provide large amounts of bandwidth, yet low-enough to be
wireless and long-distance. At EHF and above, it starts to get into
the IR range where long-distance wireless reception is not possible
and atmospheric opacity begins to dominate.


Equally important, SHF frequencies can efficiently transmit signals
using extremely small transmitters. Longer wavelengths require larger
transmitters.


Obviously there are frequencies lower than SHF -- VHF and above --
that can easily penetrate charged particles [e.g. anything resembling
the ionosphere or heliosphere]. However, lower-frequencies tend to
result in less bandwidth, so it is better to use higher-frequencies
when the application requires significant bandwidth.


I choose AM because it requires less bandwidth than FM. In addition,
AM tends to retain reception of rather weak signals, while FM
"considers" such signals to be absent.


Too much time on your hands again?- Hide quoted text -

- Show quoted text -


.. . .


RHF July 15th 07 10:31 PM

. . . How I would like to change the cell phone industry [was AM electromagnetic waves: 20 KHz modulation frequency on an astronomically-low carrier frequency]
 
On Jul 15, 1:56 pm, "Brenda Ann" wrote:
wrote in message

...



Cell phones already use frequencies in the 3 GHz region.


Really? Which ones? I'm only aware of cell systems using 800, 900, 1800 and
1900 MHz. There are some (very few) multisystem phones that use all four of
those ranges.


.. . .



All times are GMT +1. The time now is 02:28 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com