LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #6   Report Post  
Old July 25th 07, 10:51 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Dec 2006
Posts: 1,169
Default Question 1/4 Wave Ground Plane Measurements

DeanO wrote in news:1185380995.439253.125410
@d55g2000hsg.googlegroups.com:

....
PS I would only measure to the top of the loop... not counting the
'fold over' that makes up the loop. The wire actually folds back down
the main radiator and thus cancels its lenghting effect (except for
the small capacitance I talked about).


Isn't this somewhat similar to linear loading... which does lower the
resonant frequency?

Owen
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Does a 5/8 wave antenna need a metal ground plane? bbnn Antenna 2 March 6th 05 10:26 PM
FS: 1/4 WAVE GROUND PLANE CB Marty B. CB 0 October 11th 04 01:58 PM
shunt inductor for 1/4 wave ground plane denton Antenna 4 August 28th 04 08:58 PM
5/8 wave ground plane Larry D Antenna 41 May 21st 04 11:19 AM
Plans for a 5/8 wave 2M ground plane George Cronk Antenna 21 April 6th 04 10:14 AM


All times are GMT +1. The time now is 09:43 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017