Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
On Tue, 14 Aug 2007 22:31:58 -0400, Roger (K8RI) wrote:
A lot depends on the current installation, but you have the VHF/UHF array at 60 feet. Being 10 feet above the top of the tower that is quite a bending moment although to do that I'd assume you have the rotator down inside the tower. Good afternoon, Roger. The VHF/UHF "array" is merely a vertical, Diamond X3200. I'm quite certain it and the relatively thin wall mast supporting it will break LONG before the tower does even with no additional guying. However, today I started thinking about maybe putting up a 2-element SteppIR, mostly because I need to operate on MARS frequencies that are a ways outside the 20-meter band. No doubt that becomes a whole 'nother ballgame. I'll start a new thread on that topic. |
#2
![]() |
|||
|
|||
![]()
On Wed, 15 Aug 2007 13:30:17 -0400, "Rick (W-A-one-R-K-T)"
wrote: On Tue, 14 Aug 2007 22:31:58 -0400, Roger (K8RI) wrote: A lot depends on the current installation, but you have the VHF/UHF array at 60 feet. Being 10 feet above the top of the tower that is quite a bending moment although to do that I'd assume you have the rotator down inside the tower. Good afternoon, Roger. The VHF/UHF "array" is merely a vertical, Diamond X3200. I'm quite certain it and the relatively thin wall mast supporting it will break LONG I think you'll be surprised at how much flexing tht antenna can take. I've seen the one on the big tower bent over with the top appearing to be 4 or 5 feet off from vertical. That's a long ways for a 21 foot tall vertical. before the tower does even with no additional guying. I have two of the big Diamonds up. One is at roughly 30 feet on the side of the big tower and the other is on top of 20' of 1 1/2" TV masting on the3 North side of my shop. A third is going up on the big tower for digtital at roughly 60 feet and the lower one is going to be moved directly under it. However, today I started thinking about maybe putting up a 2-element SteppIR, mostly because I need to operate on MARS frequencies that are a ways outside the 20-meter band. No doubt that becomes a whole 'nother ballgame. I'll start a new thread on that topic. Good Luck, es 73 |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
FA: TUF-TUG FALL PROTECTION HARNESS W/ WIRE ROPE GRAB | Swap | |||
FA: TUF-TUG FALL PROTECTION HARNESS W/ WIRE ROPE GRAB | Equipment | |||
FA: TUF-TUG FALL PROTECTION HARNESS W/ WIRE ROPE GRAB | Antenna | |||
FA: TUF-TUG FALL PROTECTION HARNESS W/ WIRE ROPE GRAB | Antenna | |||
Guy wire vs. guy rope | Antenna |