Home |
Search |
Today's Posts |
#7
![]() |
|||
|
|||
![]()
cmor wrote:
... Thanks, Chris Don't worry about the noise. Construct the best possible setup you can. Pay close attention to matching the impedance to the receiver. Use quality/high-freq semiconductors, even better than required/stated--if possible, keep those noise figures low. Remove the antenna away from any potential noise source as you possibly can. Keep the antenna as high as you possibly can. Place the antenna where it will get the largest possible view of the heavens/horizon. Use as Hi-Q coil/cap as you can, to narrow the bandwidth as much as can be logically tolerated. Keep the coax/feeder as short as is logically possible and the run away from noise sources. Etc. ... Now, worry about what you can do to help with noise reduction ... if you find you have too much gain, drop a gain control in ... filters? Regards, JS |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
WTB Bug Catcher Antenna Coil 80 meter large dia and Cap hat Large dia | Antenna | |||
Large Ferrite Bar Ant. | Shortwave | |||
WTB Bug Catcher Antenna Coil 80 meter large dia and Cap hat Large dia | Swap | |||
Tuned MFJ-1024 Active Antenna | Shortwave | |||
tuned? cobra 7 antenna | CB |