We all know that when a generator produces alternating electricity,
it produces it with a rotational movement only. At no time does the
generater
move backwards and forwards. When describing the value of the current
we can see that the current has a constant value as the rotor of the
generator
revolves. The current appears to be going up and down in value only
because
of the vantage point taken. If we view the generator from the side we
can see that
the vector angle of the current value is a segment of a revolution .
Thus it can be seen that what appears to be a change in magnitude of
the current,
is the effect, of a segment of the generators revolution.
The line that this generator connects to is a diamagnetic material
where the
energy in the line is a direct reflection of the position of rotation
of the generator's rotor.
This diamagnetic material is recognised by a skin on its surface as in
a patenna. which
is the dielectric(pattina in antique circles) between the center of
the material
and the outside surface and thus
represents a continuous capacitive connection which leads back to the
source .
There is a closed DC circuit at any moment in time. The outside of a
diamagnetic
material is where the current is actually active and where the
amplitude changes
according to the action of the capacitance up to that point. By
rotating the amplitude
changes it represents the rotative action of the current at that point
which by its
measure of rotation represents the fraction applicable to a revolution
other wise
known as a period with reference to the frequency of rotation.
We can now see the circuit as a reflection of the current amplitude
and its phase
with respect to the segment of a period that is depicted at that point
only which
is not physically connected to the vectors portrayed at any other
point in the
circuit. Thus when considering a single revolution only of a
generator we are
seeing at all times a continual DC current generation where the
apparent
amplitude of the current only reflects a constant current and the
portion of the
reolution or period that can be considered at that point. Thus when it
appears to have
maximum amplitude it is only a representation of the completion of
half a revolution
determined by the direction of the apparent current vector.
This electrical circuit is generally known as a 'tank circuit' which
does NOT have any
TRAVELLING waves OR any waves that BOUNCE since there is no
discontinuity
in the circuit at any point in time.
One can clearly see the true action of the current by using a crt that
reflects
the phase changes applied to the constant current values generally
known as
a spectrum analyser where what is seen as the angular position of a
true dipole
that is part of the molecular structure of the material as a whole.
and where
resonance is depicted by the angle of the internal dipole at the
circuits source.

If I have made errors in spelling I apologise.
Best regards
Art Unwin .....KB9MZ.....xg(uk)