RadioBanter
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

RadioBanter (https://www.radiobanter.com/)
-   Antenna (https://www.radiobanter.com/antenna/)
-   -   2 x 4 to 1 voltage balun in series (https://www.radiobanter.com/antenna/130831-2-x-4-1-voltage-balun-series.html)

Cheers March 4th 08 02:22 AM
2 x 4 to 1 voltage balun in series
 
In article ,
says...

Hi

can someone explain how to connect 2 voltage 4:1 baluns in series to
achieve 16:1

Thanks

Bit of update

finished the antenna and got it up and running yesterday, the only HF
gear I have ATM is a 27MHz SSB Cb radio (12 watt), got 1.5-1.6/SWR, so I
guess is working ?:-) (lot of thanks for those who helped)

I was lucky to find 2mm(SQ) tinned wire Insulated, I made the resistor
out of 20 x 18k CF 1w resistor soldered in parallel.
my next question is how much power this antenna can or should handle?
I was thinking somewhere around 20 watts ?

--
The information contained in this post is copyright of
the poster, and specifically may not be published in,
or used by http://www.jlaforums.com

Cecil Moore[_2_] March 4th 08 04:39 AM
2 x 4 to 1 voltage balun in series
 
Cheers wrote:

I have a bunch of 600 ohm 50 watt non-inductive resistors.
My email address is

Sent you an email to the above address few days ago, have you received
it?

Sorry, no, I didn't get it. It must have gone into the
junk folder which gets automatically deleted. Please
send it again and I'll look for it.
--
73, Cecil http://www.w5dxp.com


All times are GMT +1. The time now is 04:08 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com