LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #17   Report Post  
Old March 2nd 08, 05:38 AM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Dec 2007
Posts: 69
Default SGC coupler to Dipole feedling question


Ed, you would be Much Better Off, if they would allow you to use (2)
runs of Coax, side by side up the mast, and connect only the Center
Conductor of each, to the tuner, with the shield left open on each
end and sealed against water intrusion.


What does this do, what does it achieve?

Owen



My expertise is weak in this area, but just guessing.... using twin
coax in the above configuration, if the shields were grounded, would
allow the feedling between the antenna coupler and the feedpoint to be
'balanced' and yet the shields would not radiate as they would with a
single coax run.

Perhaps others, here, will either expand on this, or correct my
misconception.

Ed K7AAT
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Question on dipole SWR problem Ed G Antenna 39 October 30th 07 04:58 PM
dipole question [email protected] Antenna 4 July 6th 05 04:31 PM
Low dipole performance question Ken Bessler Antenna 12 February 5th 05 02:06 PM
Dipole question Vinnie S. CB 85 January 18th 05 04:41 AM
Dipole Length Question Cecil Moore Antenna 7 April 23rd 04 05:01 PM


All times are GMT +1. The time now is 11:56 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017