LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #7   Report Post  
Old March 12th 08, 06:30 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 2,951
Default From NEC2 to the real world with accuracy

On Wed, 12 Mar 2008 07:50:08 -0700 (PDT), wrote:

With respect to manually tuning the quad (reflector) after its up,
yes, that seems to be the conventional wisdom. How practical and
possible is that for me? Mine will sit on 72' US Tower crankup/tilt
over - short of renting some huge bucket/boom, I can't see myself
manually tuning it when its up. The best I will do is take some type
of field measurements and see if it displays anything close to the
pattern NEC2 predicts - or better yet, just see if I am happy with it
as is. I did not have to make any adjustments to the monoband yagi
that went right from NEC2 to the tower, so, I am hoping for the same
good fortune.


Hi Scott,

For tuning, one established technique is to get it up high enough off
the ground, pointed up, so that it is not affected by ground too much,
but still accessible by a ladder.

As for checking actual performance, note that in all practicality you
lack the means to measure the full 3 dimensional performance. Further,
even monitoring out 10 miles still puts you below the horizon, and for
HF that is barely more than a correlative, as nearly every NEC tool
shows performance above the horizon when it comes to the radiation
lobe characteristics. Otherwise you would need a helicopter....

You can measure against beacons, but now you toss in the variable of
propagation and you would have to marry the NEC output to WINCAP and
perform several dozen tests each day over the course of a month or
two. IF YOU ARE TALKING PRECISION AND ACCURACY.

On the other hand, you've already validated your testing, modeling,
and performance to your efforts for one band - Trust your tools and
data to be able to extrapolate it.

73's
Richard Clark, KB7QHC
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
VU4 log accuracy... Zlatko Feric Dx 3 March 12th 05 01:33 AM
What is the max power (dBm) a AM receiver can get in the real world? Jianhong Wang Broadcasting 12 March 6th 04 05:45 PM
IN THE REAL WORLD ANTI GIRLS CAN DO NOTHING TO STOP THIS... Chim Bubba CB 4 December 2nd 03 07:45 PM
Bode plots in the real world Jack Smith Homebrew 1 August 8th 03 02:29 AM
ARRL on real world BPL tests - devastating effect on the HF bands Rob Kemp Policy 0 August 1st 03 04:03 PM


All times are GMT +1. The time now is 02:24 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017